Views
4 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Creating a new folder

Creating a new folder You can create a folder in a memory card for recording images. A new folder is created with a number incremented one higher than the largest number currently used, and the folder becomes the current recording folder. A folder for still images and a folder for movies are created at the same time. MENU button t 1 t [New Folder] Notes • When you insert a memory card that was used with other equipment into the camera and shoot images, a new folder may be automatically created. • Up to 4 000 images can be stored in a folder. When the folder capacity is exceeded, a new folder is created automatically. Selecting the recording folder When a standard form folder is selected and there are two or more folders, you can select the recording folder to be used to record images. MENU button t desired folder 1 t [Select REC Folder] t Select the Notes • You cannot select the folder when you select the setting [Date Form]. • You cannot select the folder for movies. Formatting the memory card Note that formatting irrevocably erases all data on a memory card, including protected images. MENU button t 1 t [Format] t [Enter] Notes • During the format, the access lamp lights up. Do not eject the memory card while the lamp is lit. • Format the memory card using the camera. If you format it on a computer, the memory card may not be usable with the camera, depending on the format type used. • Formatting may take several minutes depending on the memory card. 146

Recovering image database When inconsistencies are found in the image database file of movies, caused by processing movies on computers, etc., movies on the memory card will not be played back in this form. If this happens, the camera repairs the file. MENU button t 1 t [Recover Image DB] t [Enter] Note • Use a sufficiently charged battery. Low battery power during repairing can cause damage to data. Checking the remaining space of the card Displays the remaining recording time of movies and the number of recordable still images on the memory card. MENU button t 1 t [Display Card Space] Setting the upload function for an Eye-Fi card Sets whether or not you use the upload function when using an Eye-Fi card (commercially available). This item appears when an Eye-Fi card is inserted in the camera. MENU button t setting 2 t [Upload Settings] t Select the desired Changing your setup The status indicators in communication Standby. No images are to be sent. Upload standby. Connecting. Uploading. Error 147