Views
4 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

GPS

GPS (SLT-A55V only) The camera is not receiving a GPS signal. • Set [GPS On/Off] to [On] (page 138). • Your camera may not be able to receive radio signals from GPS satellites because of obstructions. • To triangulate the location information correctly, bring your camera to an open area, and turn on the camera again. Excessive error in location information. • The margin of error can be up to several-hundred meters depending on surrounding buildings, weak GPS signals, etc. • When your camera cannot receive a GPS signal, previously-triangulated location information is used in the present location instead. If you move a long distance, incorrect location information may be recorded. Check the triangulation status with the GPS indicator displayed on the screen during shooting (page 138). It takes time to triangulate although GPS assist data has been taken in. • [Date/Time Setup] is not set, or set time is shifted greatly. Set the date and time correctly (page 28). • The term of validity of assist data has expired. Update the GPS assist data (page 139). • As the positions of GPS satellites vary constantly, it may take longer to determine the location or the receiver may not be able to determine the location at all, depending on the location and time you use the camera. • “GPS” is a system for determining geographic location by triangulating radio signals from GPS satellites. Avoid using the camera in places where radio signals are blocked or reflected, such as a shadowy place surrounded by buildings or trees, etc. Use the camera in open sky environments. The location information has not been recorded. • Use “PMB” to import the movies with GPS location information to your computer. 184

Computers You do not know if the OS of your computer is compatible with the camera. • Check “Using with your computer” (page 159). Your computer does not recognize your camera. • Check that the camera is turned on. • When the battery level is low, install the charged battery pack (page 18), or use the AC Adaptor (sold separately). • Use the USB cable (supplied) (page 165). • Disconnect the USB cable, and connect it again firmly. • Set [USB Connection] to [Mass Storage] (page 165). • Disconnect all equipment other than the camera, the keyboard and the mouse from the USB jacks of your computer. • Connect the camera directly to your computer without passing through a USB hub or other device (page 165). You cannot copy images. • Make the USB connection by properly connecting the camera with your computer (page 165). • Follow the designated copy procedure for your OS (page 165). • When you shoot images with a memory card formatted by a computer, you may not be able to copy the images to a computer. Shoot using a memory card formatted by your camera (page 146). The image cannot be played back on a computer. • If you are using “PMB,” refer to the “PMB Help.” • Consult the computer or software manufacturer. Others After making a USB connection, “PMB” does not start automatically. • Make the USB connection after the computer is turned on (page 165). Memory card Cannot insert a memory card. • Insertion direction of the memory card is wrong. Insert it in the correct direction (page 20). 185