Views
4 months ago

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

Sony SLT-A33 - SLT-A33 Consignes d’utilisation Anglais

3 Shoot the image after

3 Shoot the image after the exposure is set. • Check the exposure value on the EV scale (Metered Manual*). Toward +: Images become brighter. Toward –: Images become darker. The b B arrow appears if the set exposure is beyond the range of the EV scale. The arrow starts flashing if the difference becomes greater. * When the camera is in M mode, it will show an under or over compensation value based on the correct exposure using the index on the exposure compensation indicator. Standard value Notes • The (Camera shake warning) indicator is not indicated in manual exposure mode. • When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode, the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary (page 106). • Press the button when you shoot with the flash. However, the flash range differs according to the aperture value. When you shoot with the flash, check the flash range (page 98). Manual shift You can change the shutter speed and aperture value combination without changing the exposure you set. Rotate the control dial while pressing the AEL button to select the shutter speed and aperture value combination. AEL button 78

Shooting trails with long exposure (BULB) This mode is suitable for z Shooting trails of light, such as fireworks. z Shooting trails of stars. 1 Set the mode dial to M. 2 Rotate the control dial to the left until [BULB] is indicated. Shooting images BULB 3 While pressing the button, rotate the control dial to adjust the aperture (F-number). button 79