Views
3 months ago

Sony XR-CA800 - XR-CA800 Consignes d’utilisation

Sony XR-CA800 - XR-CA800 Consignes d’utilisation

Other Functions You can

Other Functions You can also control the unit (and optional CD/ MD units) with a rotary commander. RM-X5S (supplied)/RM-X4S (optional) Using the rotary commander By pressing buttons (SOURCE) (SOUND) Turn the dial to change the direction of intrared rays. (RM-X5S only) (ATT) (MODE) First, attach the appropriate label depending on how you want to mount the rotary commander. The rotary commander works by pressing buttons and/or rotating controls. (DSPL) Rotate the VOL control to adjust the volume. OFF (OFF) SOUND MODE DSPL DSPL MODE SOUND Inserting the supplied lithium battery (RM-X5S only) Press (SOURCE) (MODE) (ATT) (OFF)* 2 (SOUND) (DSPL) To Change source (radio/CD* 1 /MD* 1 /Tape) Change operation (radio band/CD unit* 1 /MD unit* 1 /tape playback direction) Attenuate sound Stop playback or radio reception Adjust the sound menu Change the display item x + side up *1 Only if the corresponding optional equipment is connected. *2 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. To turn the unit on, press the power on/off button on the unit. Tip For information on lithium battery, refer to “Notes on lithium battery” (page 25). 16

By rotating the control Changing the operative direction The operative direction of controls is factory-set as shown below. To increase SEEK/AMS control Rotate and release to: – Locate the beginning of tracks on the tape. – Tune in stations automatically. – Skip tracks on the disc.* Rotate, hold, and release to: – Fast-wind the tape. – Find a station manually. – Fast-forward/reverse a track.* Tip To start playback while fast-winding the tape, press (MODE). To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. RM-X5S By pushing in and rotating the control ATT Rev Nor SOURCE PRESET DISC VOL SEEK AMS PRESET/ DISC control Push in and rotate the control to: – Receive preset stations. – Change the disc.* * Only if the corresponding optional equipment is connected. Set the Rev/Nor-select switch to “Rev.” RM-X4S Press (SOUND) for 2 seconds while pushing the VOL control. 17