manualsmania
Views
7 months ago
Flag

Sony VPCF13S1E - VPCF13S1E Mode d'emploi Anglais

Sony VPCF13S1E - VPCF13S1E Mode d'emploi Anglais

Upgrading Your VAIO

Upgrading Your VAIO Computer > Adding and Removing Memory n106 N 8 Slide the memory module into the memory module slot and push it in until it clicks into place. ! Do not touch any components on the motherboard other than the memory module. Be sure to insert the connector edge of the memory module into the slot while aligning the notch on the module with the small projection in the open slot. Do not force the memory module into the slot in a wrong orientation, as it may cause damage to the slot and the module. 9 Replace the memory module compartment cover. 10 Tighten the screw on the bottom of the computer. 11 Reinstall the battery pack and turn on the computer.

Upgrading Your VAIO Computer > Adding and Removing Memory n107 N Viewing the Amount of Memory To view the amount of memory 1 Turn on the computer. 2 Click Start, All Programs, and VAIO Control Center. 3 Click System Information and System Information. You can view the amount of system memory in the right pane. If the additional memory does not appear, repeat the installation procedure and restart the computer.

Don't wait! Try Yumpu.
Start using Yumpu now!

Terms of service
Privacy policy
Cookie policy
Imprint
Made with love in Switzerland