Views
3 months ago

Sony VPCF13S1E - VPCF13S1E Mode d'emploi Anglais

Sony VPCF13S1E - VPCF13S1E Mode d'emploi Anglais

Troubleshooting >

Troubleshooting > Networking (LAN/Wireless LAN) n140 N How do I avoid data transfer interruptions? ❑ ❑ ❑ ❑ ❑ While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones. Move your computer closer to the access point. Make sure the access point connection is intact. Change the access point channel. See the manual that came with your access point for more information. Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot connect to a wireless LAN access point? (page 137) to change the settings. What are channels? ❑ ❑ Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices. If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point. Why does the network connection stop when I change the encryption key? Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed. You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.

Troubleshooting > Bluetooth Technology n141 N Bluetooth Technology What should I do if other Bluetooth devices cannot find my computer? ❑ ❑ ❑ ❑ Make sure both devices have the Bluetooth function enabled. Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer. You cannot use the Bluetooth function while your computer is in a power saving mode. Bring the computer back to Normal mode, then turn on the WIRELESS switch. Your computer and the device may be too far apart. Wireless Bluetooth technology works best when the devices are within 10 meters of each other. What should I do if I cannot find the Bluetooth device I want to communicate with? ❑ ❑ ❑ Check that the Bluetooth function of the device you want to communicate with is on. See the other device's manual for more information. If the device you want to communicate with is already communicating with another Bluetooth device, it may not be found or it may not be able to communicate with your computer. To allow other Bluetooth devices to communicate with your computer, follow these steps: 1 Click Start and Devices and Printers. 2 Right-click the Bluetooth device icon and click Bluetooth settings. 3 Click the Options tab and select the Allow Bluetooth devices to find this computer check box.