Views
1 week ago

Sony VPCSA4A4E - VPCSA4A4E Mode d'emploi Anglais

Sony VPCSA4A4E - VPCSA4A4E Mode d'emploi Anglais

Using Peripheral Devices

Using Peripheral Devices > Connecting a Port Replicator n104 N ! Be sure to slide the tab (1) to the end. If not, the connector (2) is not locked in the correct position, resulting in a contact failure between your computer and the port replicator. When the extended battery pack is not attached to your computer, slide the tab (1) in the opposite direction of the arrow to lower the connector (2). Attaching the computer while the connector (2) is in the lifted position may damage the connectors. 6 Gently push down the computer until it clicks into place. 7 Lift open the LCD screen lid and turn on the computer.

Using Peripheral Devices > Connecting a Port Replicator n105 N Disconnecting Your Computer from the Port Replicator ! To prevent loss of unsaved data, be sure to turn off your computer before disconnecting it from the port replicator. When the battery pack is running out of power, disconnecting your computer from the port replicator may result in loss of unsaved data. To disconnect your computer from the port replicator 1 Lift the computer away from the port replicator.