Views
8 months ago

Sony HDR-PJ760E - HDR-PJ760E Consignes d’utilisation Anglais

Sony HDR-PJ760E - HDR-PJ760E Consignes d’utilisation Anglais

Charging the battery

Charging the battery pack 1 Close the LCD screen after replacing the viewfinder (HDR- CX730E/CX740VE/CX760E/ CX760VE/PJ740VE/PJ760E/ PJ760VE) and attach the battery pack. 2 Connect the AC Adaptor () and the power cord (mains lead) () to your camcorder and the wall outlet (wall socket). The CHG (charge) lamp turns on. The CHG (charge) lamp turns off when the battery pack is fully charged. Disconnect the AC Adaptor from the DC IN jack of your camcorder. 16 GB Battery pack CHG (charge) lamp DC plug Align the mark on the DC plug with that on the DC IN jack To the wall outlet (wall socket) Notes You cannot attach any “InfoLITHIUM” battery pack other than the V series to your camcorder. DC IN jack

Charging the battery using your computer Turn off your camcorder and connect the camcorder to a running computer using the Built-in USB Cable. Built-in USB cable To the wall outlet (wall socket) Getting started To charge the battery from a wall outlet (wall socket) using the Built-in USB Cable You can charge the battery by connecting the Built-in USB Cable to a wall outlet (wall socket) using an AC-UD10 USB charger/AC Adaptor (sold separately). You cannot use a Sony CP- AH2R, CP-AL, or AC-UP100 portable power supply device (sold separately) to charge the camcorder. Charging time Approximate time (min.) required when you fully charge a fully discharged battery pack. Charging time Battery pack Built-in USB Cable* (when AC Adaptor using your computer) NP-FV50 (supplied) 155 280 NP-FV70 195 545 NP-FV100 390 1,000 The charging times shown in the table above are measured when charging the camcorder at a temperature of 25 °C (77 °F). It is recommended that you charge the battery in a temperature range of 10 °C to 30 °C (50 °F to 86 °F). * The charging times are measured without using the USB connection support cable. 17 GB