Views
8 months ago

Sony HDR-PJ760E - HDR-PJ760E Consignes d’utilisation Anglais

Sony HDR-PJ760E - HDR-PJ760E Consignes d’utilisation Anglais

2 3 42 GB Rotate the

2 3 42 GB Rotate the MANUAL dial and select the item to be assigned. Select [Reset] to reset the items adjusted manually to the default settings. Press MANUAL. The camera data that appears on the LCD screen will differ, depending on the recording settings of the camcorder. The settings will be displayed with the following icons. : Automatic : Exposure is set manually. : IRIS priority : Shutter speed priority Notes Manual settings will be retained even if you change the assigned item of the MANUAL dial. However, if you set [Exposure] after setting [AE Shift] manually, [Exposure] will override [AE Shift]. If you set either one of [Exposure], [IRIS], or [Shutter Speed], the settings of other 2 items are canceled. [Data Code] (p. 71) Recording information on your location (GPS) (HDR- CX740VE/CX760VE/PJ710VE/ PJ740VE/PJ760VE) The following features are available if you use the GPS (Global Positioning System) function. Recording location information on movies or photos ([On] is the default setting.) Playing movies and photos by searching for them from a map (Map View, p. 31) Displaying a map of your current location

GPS triangulating status Searching for the satellites Number of dots changes Notes It may take a while before the camcorder starts triangulating. Use the GPS function outdoors and in open areas, as the radio signals can best be received in such areas. The map always displays the north at the top. Obtaining a map of the current location (triangulating priority mode) Triangulating Triangulating meters Unable to triangulate Unable to record location information This feature is useful for checking a map of your current location while traveling. As the camcorder turns other functions off to search for satellites, obtaining triangulating information can take priority. Select [Setup] [ General Settings] [Your Location]. A marker (red) that indicates your current location Advanced operations Images will be registered using the location information that was previously obtained. If you do not want to record location information Select [Setup] [ General Settings] [GPS Setting] [Off]. Displays the triangulating information (p. 44) Notes If you select a certain point on the screen, the map shows an area with that point at the center. Select to move your current location back to the center again. If the camcorder cannot acquire current location information, the triangulating information screen appears (p. 44). If the location information that was previously acquired is invalid, the marker does not appear. To close the current location screen, select . 43 GB