21.05.2016 Views

KitchenAid MAF7510AW MM - Washing machine - MAF7510AW MM - Washing machine EUR (852120463100) Installazione

KitchenAid MAF7510AW MM - Washing machine - MAF7510AW MM - Washing machine EUR (852120463100) Installazione

KitchenAid MAF7510AW MM - Washing machine - MAF7510AW MM - Washing machine EUR (852120463100) Installazione

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

10600830.fm Page 7 Tuesday, December 19, 2006 6:06 PM<br />

Skrukan hos air masuk dengan tangan pada pili, dan ketatkan nat.<br />

Perhatian:<br />

• Hos jangan dibiarkan terpiuh!<br />

• Jangan sambungkan mesin pada pili air campuran daripada pemanas air tanpa<br />

tekanan.<br />

• Buka pili air sepenuhnya dan pastikan sambungan semuanya kalis air.<br />

• Jika hos terlalu pendek, gantikan dengan hos yang cukup panjang, jenis kalis<br />

tekanan (minimum 1000 kPa, jenis diluluskan EN 50084).<br />

• Dari masa ke masa, periksa hos kalau-kalau rapuh atau retak dan gantikan jika perlu.<br />

• Mesin basuh ini boleh disambungkan tanpa injap sehala.<br />

Bagi model yang dilengkapi hos Hentian Air:<br />

Jika hos fleksibel terlalu pendek, gantikan dengan hos Hentian Air 3 m (boleh didapati<br />

daripada Bahagian Servis Lepas Jualan atau pihak penjual). Mesti diganti oleh juruelektrik<br />

yang terlatih sahaja.<br />

Bergantung pada model, hos air masuk dan lekapan plastik pada sambungan pili mungkin<br />

mengandungi komponen elektrik. Jangan potong hos dan jangan rendam lekapan plastik<br />

dalam air. Jika hos rosak, matikan bekalan elektrik dengan serta merta.<br />

Screw by hand the inlet hose onto the tap tightening the nut.<br />

Attention:<br />

• no kinks in the hose!<br />

• The appliance must not be connected to the mixing tap of an un-pressurized<br />

water heater.<br />

• Check water-tightness of connections by turning the tap completely on.<br />

• If the hose is too short, replace it with a suitable length of pressure resistant hose<br />

(1000 kPa min, EN 50084 approved type).<br />

• Check the inlet hose regularly for brittleness and cracks and replace if necessary.<br />

• The washing <strong>machine</strong> can be connected without a non-return valve.<br />

For models with Water Stop hose:<br />

If the flexible hose is too short, replace it with a 3 m Water Stop hose (available from After-Sales<br />

Service or from your dealer). This replacement is only to be carried out by a trained electrician.<br />

Depending on the model, the inlet hose and the plastic enclosure at the tap connection contain<br />

electrical components. Do not cut the hose and do not immerse the plastic enclosure in<br />

water. Isolate the appliance from the mains immediately if the hose is damaged.<br />

7<br />

Black process 45.0° 130.0 LPI

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!