Views
10 months ago

Sony MHC-C20 - MHC-C20 Istruzioni per l'uso Inglese

Sony MHC-C20 - MHC-C20 Istruzioni per l'uso Inglese

Playing the CD tracks in

Playing the CD tracks in random order –– Shuffle Play Programming the CD tracks –– Program Play You can play all the tracks on one CD or all CDs in random order. You can make a program of up to 32 tracks from all the CDs in the order you want them to be played. 2,5 3 2 1 1 Press CD and place a CD on the disc tray. p 7 1 4 2 Press SHUFFLE. “SHUFFLE” appears, then all the tracks play in random order. (P = + p To cancel Shuffle Play Press SHUFFLE so that “SHUFFLE” disappears. Tips • You can start Shuffle Play during normal play by displaying “SHUFFLE”. •To skip a track, press )±. Note You cannot select a CD even if you press DISC SKIP while shuffle play. CLEAR 1 Press CD and place a CD on the disc tray. 2 Press PROGRAM. “PROGRAM” appears. 3 Press one of the DISC 1 – 3 buttons to select a CD. 16 MHC-G202/C20. 3-859-548-12. EN

4 Press )± or 0 to select a track. 1 2 3 Selected track PROGRAM PRESET EQ FLAT ROCK POPS JAZZ Playing only the beginning of each track — Music Scan The begining of each track on all the CDs in the CD tray play for 10 seconds. Selected disc 5 Press PROGRAM. The track is programmed. The last programmed track appears. = + M.SCAN (P p 6 To program additional tracks, repeat steps 3 to 5. Skip step 3 if you select a track from the same disc. 7 Press ·P. All the tracks play in the order you selected. To Program a pause Stop play Cancel program play Erase a track from the end Erase the entire program Press · P p p CLEAR on the remote in stop mode p for more than two seconds To play only the begining of each track Press M. SCAN on the remote. Track number blinks during the scanning. To cancel music scan Press M. SCAN on the remote again. Tips • The program you made remains after the Program Play has finished. To play the same program again, press ·P. • “FULL” appears when you have programmed more than 32 track numbers. 17 MHC-G202/C20. 3-859-548-12. EN