Views
8 months ago

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Using Peripheral Devices

Using Peripheral Devices > Connecting a Port Replicator n100 N Connecting a Port Replicator Attaching an optional port replicator enables you to connect additional peripherals to your computer, such as a printer and an external display. Locating Ports on the Port Replicator A DC IN indicator Illuminates while the port replicator is powered. B DC IN port (page 101) C USB ports *1 (page 119) D LAN ports *2 (page 67) E HDMI output port (page 111) F MONITOR port (page 109) G Security slot *1 Compliant with the USB 2.0 standard. *2 The port replicator has a protective sticker covering each LAN port. Connect a 10BASE-T, 100BASE-TX, 1000BASE-T cable to the LAN port. Using an incorrect cable, such as a phone cable, may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the LAN port. ! While the port replicator is attached to you computer, you cannot use the following ports. - HDMI output port on your computer - MONITOR port on your computer - LAN port on your computer Simultaneous use of the MONITOR port and the HDMI output port on the port replicator is not possible.

Using Peripheral Devices > Connecting a Port Replicator n101 N Attaching Your Computer to the Port Replicator ! Be sure to install the battery pack(s) before attaching your computer to the port replicator. To attach your computer to the port replicator ! If the AC adapter is supplied with your port replicator, be sure to use it to connect the port replicator to a power source. If not, use the AC adapter supplied with your computer. To prevent loss of unsaved data, be sure to turn off your computer before attaching it to the port replicator. Do not move your computer when it is attached to the port replicator. This may detach the port replicator and cause damage to both units. The monitor port, the HDMI output port, and the LAN port on your computer is not accessible when the computer is attached to the port replicator. Use the MONITOR port, the HDMI output port, or the LAN port on the port replicator for connection. 1 Shut down the computer, close the LCD screen lid, and disconnect all peripheral devices and the AC adapter. 2 Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet. 3 Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the port replicator.