Views
8 months ago

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Troubleshooting >

Troubleshooting > Battery Pack n172 N Can my computer enter Hibernate mode while running on battery power? Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode (page 34) for information on how you can manually activate Hibernate mode. Why can't I fully charge my battery pack? The battery care function is enabled to extend the life of your battery pack on the VAIO Control Center. Check the settings on the VAIO Control Center. What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode? ❑ ❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again. If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again. For information on how to install and remove the battery pack, see Installing/Removing the Battery Pack (page 21). If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO Computer (page 5).

Troubleshooting > Built-in Camera n173 N Built-in Camera Why does the viewfinder show no images or poor-quality images? ❑ ❑ ❑ The built-in camera cannot be shared by more than one software application. Exit the current application before launching another. On models with Media Gallery, you cannot use another camera application that uses the built-in camera while using the gesture function of Media Gallery. The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This is normal and does not indicate a malfunction. If the problem persists, restart your computer. Why is the video input from the built-in camera suspended for a few seconds? The video input may be suspended for a few seconds if: ❑ a shortcut key with the Fn key is used. ❑ the CPU load increases. This is normal and does not indicate a malfunction. Why are captured images poor in quality? ❑ The images captured under the fluorescent light may show reflections of light. ❑ A dark portion in captured images may appear as a noise. ❑ The area on and around the built-in camera is dirty. Clean the area. See Care and Maintenance Information (page 146).