Views
6 months ago

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Sony VPCSE2E1E - VPCSE2E1E Istruzioni per l'uso Inglese

Troubleshooting >

Troubleshooting > Microphone n194 N Microphone What should I do if my microphone does not work? ❑ Your computer is not equipped with the microphone jack. You cannot use an external microphone. ❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps: 1 Close all open programs. 2 Click Start and Control Panel. 3 Click Hardware and Sound. 4 Click Manage audio devices under Sound. 5 On the Recording tab, select your desired device for sound input and click Set Default. How can I prevent microphone feedback? Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker. To prevent this problem: ❑ Keep the microphone away from a sound output device. ❑ Turn down the volume of the speakers and the microphone.

Troubleshooting > Speakers n195 N Speakers What should I do if I do not hear sound from the built-in speakers? ❑ ❑ ❑ ❑ ❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information. The volume may have been turned off by the Fn+F2 keys. Press them once again. The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound. Check the Windows volume controls by clicking the volume icon on the taskbar. Your sound output device may have been incorrectly configured. To change the sound output device, see How do I change the sound output device? (page 200). Why is sound from the built-in speakers distorted? Depending on the Dolby playback mode, sound from the built-in speakers may be distorted during playback with the volume level close to the maximum. In such a case, follow these steps to select the proper playback mode according to the playback sound. 1 Click Start and Control Panel. 2 Click Hardware and Sound. 3 Click Manage audio devices under Sound. 4 On the Playback tab, select Speaker/Headphones and click Properties. 5 Click the Dolby tab. 6 Select the proper playback mode.