Views
5 months ago

Sony VPCF13E1R - VPCF13E1R Istruzioni per l'uso Inglese

Sony VPCF13E1R - VPCF13E1R Istruzioni per l'uso Inglese

Using Your VAIO Computer

Using Your VAIO Computer > n 32 N Using Your VAIO Computer This section describes how to get the most out of using your VAIO computer. ❑ Using the Keyboard (page 33) ❑ Using the Touch Pad (page 36) ❑ Using Special-function Buttons (page 37) ❑ Using the Built-in Camera (page 38) ❑ Using the Optical Disc Drive (page 39) ❑ Using "Memory Stick" (page 47) ❑ Using Other Modules / Memory Cards (page 54) ❑ Using the Internet (page 61) ❑ Using the Network (LAN) (page 62) ❑ Using the Wireless LAN (page 63) ❑ Using the Bluetooth Function (page 68)

Using Your VAIO Computer > Using the Keyboard n 33 N Using the Keyboard Your keyboard has additional keys that perform model-specific tasks. Combinations and Functions with the Fn Key ✍ Some keyboard functions can be used only after the operating system is finished launching. Combination/Feature Fn + % (F2): muting Fn + 2 (F3/F4): volume control Fn + 8 (F5/F6): brightness control Function Turns on and off the built-in speakers or the headphones. Changes the volume level. To increase the volume, keep pressing the Fn+F4 keys or press the Fn+F4 keys and then the M or , key. To decrease the volume, keep pressing the Fn+F3 keys or press the Fn+F3 keys and then the m or < key. Changes the LCD brightness of your computer screen. To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then the M or , key. To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then the m or < key. Fn + /T (F7): display output Switches the display output between your computer screen and an external display. Press the Enter key to select the display output. ! If you disconnect a display cable from your computer while an external display is selected as the display output destination, the computer screen goes blank. In such a case, press the F7 key twice while holding down the Fn key, and then press the Enter key to switch the display output to the computer screen. Use of multiple monitors may not be supported depending on the connected external display.