Soft Skin Effect When

Soft Skin Effect When the Face Detection function is activated, sets whether to use the Soft Skin effect, and the effect level. 1 Lower the lens cover to switch to shooting mode. 2 t (Soft Skin Effect) t desired mode Depending on the REC mode, this is set using buttons displayed on the left side of the screen. (Off) (Low) (Mid) (High) Does not use the Soft Skin Effect. Adds light Soft Skin Effect. Adds moderate Soft Skin Effect. Adds strong Soft Skin Effect. Notes • [Off] is not available when Scene Selection is set to (Soft Skin) mode. • The [Soft Skin Effect] may not be visible depending on the subject. Table of contents Operation Search MENU/Settings Search Index 82 GB

Face Detection Detects the faces of your subjects and adjusts the focus, flash, exposure, white balance and redeye reduction settings automatically. 1 Lower the lens cover to switch to shooting mode. 2 t (Face Detection) t desired mode Depending on the REC mode, this is set using buttons displayed on the left side of the screen. (When touched) (Auto) (Child Priority) (Adult Priority) Face Detection frame (Orange) When the camera detects more than one subject, the camera will judge which is the main subject and set focus by priority. The Face Detection frame for the main subject will change to an orange-colored . The frame for which the focus is set will turn green when the shutter button is pressed halfway down. Face Detection frame (White) Detects the face when an area with a face is touched on the screen. Selects the face the camera is to automatically focus on. Detects and shoots with priority on child’s face. Detects and shoots with priority on adult’s face. Notes • [Face Detection] is not available in the following situations: – In Intelligent Sweep Panorama mode – In 3D shooting mode – In Underwater iSweep Panorama mode – In Movie Mode –In Easy Mode • [When touched] is not available when [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People]. • You can select [Face Detection] only when the Focus mode is set to [Multi AF] or the Metering Mode is set to [Multi]. • The Face Detection function does not work when using the Digital Zoom. • Up to 8 faces of your subjects can be detected. • Adults and children may not be recognized correctly depending on the conditions. • During Smile Shutter shooting, [Face Detection] is automatically set to [Auto] even if it is set to [When touched]. Table of contents Operation Search MENU/Settings Search Index Continued r 83 GB