zRegistering the

zRegistering the priority face (Selected-face Memory) Normally the camera automatically selects the face to focus on according to the [Face Detection] setting, but you can also select and register a face to be given priority. 1Touch a face you want to register as the priority face during Face Detection. The selected face is registered as the priority face, and the frame changes to an orange-colored . 2Each time you touch a different face, that face is registered as the priority face. 3To cancel face registration, touch . • Each time you touch a different face, that face is registered as the priority face. • When you remove the battery from the camera or leave the power turned off for a few days, the face registration is reset. • If Tracking Focus is activated, Face Registration settings are reset. • When the registered face disappears from the LCD screen, the camera returns to the setting selected by [Face Detection]. When the registered face is shown on the LCD screen again, the camera focuses on the registered face. • It may not be possible to detect the registered face correctly depending on the surrounding brightness, the subject’s hairstyle, etc. • When the Smile Shutter function is used with the Face Detection frame registered, Smile Detection is performed only on the registered face. • In Easy Mode or when [Self-Timer] is set to [Self-portrait One Person] or [Self-portrait Two People], the priority face cannot be registered. Table of contents Operation Search MENU/Settings Search Index 84 GB

Anti Blink When Scene Selection is set to (Soft Skin) or (Soft Snap) while you are shooting an image, the camera automatically shoots two images consecutively. The camera will select, display and record the image which the eyes are not blinked automatically. 1 Lower the lens cover to switch to shooting mode. 2 (REC Mode) t (Scene Selection) t (Soft Skin) or (Soft Snap) 3 t (Anti Blink) t desired mode Table of contents Operation Search (Auto) (Off) When Face Detection is active, the Anti Blink function operates so that images with the subject’s eyes open are recorded. Does not use the Anti Blink function. MENU/Settings Search Notes • Anti Blink does not function in the following situations. – When using the flash – During burst shooting – When the Face Detection function does not work – When the Smile Shutter function is activated • Sometimes Anti Blink function does not work depending on the situation. • When the Anti Blink function is set to [Auto] but only images with the subject’s eyes closed are recorded, the message “Blinked eye detected” is displayed on the LCD screen. Shoot again as necessary. Index 85 GB