Views
1 month ago

Sony DSC-TX9 - DSC-TX9 Istruzioni per l'uso Inglese

Sony DSC-TX9 - DSC-TX9 Istruzioni per l'uso Inglese

Receiving images using

Receiving images using TransferJet 1 Press the (Playback) button to turn on the camera. 2 Closely align the (TransferJet) marks on the camera and sending device to receive images. A notification sound is emitted when connection is made. Notes • Only images that can be played back on the camera can be sent or received. • This camera can receive only JPEG and MPO files. • If an Image Database File error occurs during saving, a Recover Image Database File screen will appear. • Play images that cannot be registered in the Image Database File using [Folder view (Still)]. zTips for sending and receiving data successfully Closely align the (TransferJet) mark on the camera and other device. • The transfer rate and range differ depending on the angle at which the (TransferJet) marks are aligned. • It may be necessary to alter the position/angle of the camera until communication can be obtained. • Sending and receiving data is easier if the (TransferJet) marks are aligned with both cameras parallel to each other as shown in the figure. Table of contents Operation Search MENU/Settings Search zUsing separately sold TransferJet-compatible devices Index Using separately sold TransferJet-compatible devices allows you to transfer images to a PC and can broaden your enjoyment of transferring data. For details, see the operating instructions supplied with your TransferJet-compatible device. • Note the following points when using TransferJet-compatible devices. – Before use, set the camera to playback mode. – If an image does not display, select t (Settings) t (Main Settings) and then set [LUN Settings] to [Single]. – While connected, data cannot be written to or deleted from the camera. – Do not disconnect while importing images to “PMB”. 96 GB

Paint Paints or adds stamps to a still image and saves it as a new file. The original image is retained. Table of contents 1 Press the (Playback) button to switch to playback mode. 2 t (Paint) When using the internal memory, touch (Paint) on the left side of the LCD screen. 3 Draw on the image using the paint pen (supplied). 4 Touch the / button t select the saved image size. Operation Search MENU/Settings Search Index Button Action 1 / Save Saves the image in VGA or 5M format in the internal memory or on a memory card. 2 Pen Paint characters or graphics. 3 Eraser Make corrections. 4 Stamp Apply a stamp to the image. 5 / Thickness/Stamps Select the pen or eraser thickness, or the stamp. 6 Color Select the color. 7 Exit Exit paint mode. 8 Frame Add a frame. Select the desired frame with / . 9 Revert Undo the last action. 0 Clear all Erase all painting. Continued r 97 GB