Views
1 week ago

Sony PCG-C1VE - PCG-C1VE Istruzioni per l'uso Inglese

Sony PCG-C1VE - PCG-C1VE Istruzioni per l'uso Inglese

Using Your Notebook

Using Your Notebook Computer n N 18 Connecting a Power Source Sony Notebook Computer User Guide Use your notebook only with the supplied AC adapter. To disconnect your notebook completely from mains voltage, unplug the AC adapter. Please make sure that the socket outlet is easily accessible. Connecting a Power Source You can use either AC power or a rechargeable battery pack as a power source. Using the AC Adapter 1 Plug the cable attached to the AC adapter into the DC In connector on the computer. 2 Plug one end of the power cord into the AC adapter. 3 Plug the other end of the power cord into an AC outlet. Notebook computer DC in AC adapter (supplied) Power cord (hazardous voltage according to EN 60950) (supplied) SELV according to EN 60950

Using Your Notebook Computer n N 19 Using Battery Power Sony Notebook Computer User Guide Make sure that the lid of your computer is closed before you insert/remove the battery pack. Using Battery Power You can use a battery pack as a source of power. The PCGA-BP51A battery pack supplied with your computer is not fully charged at the time of purchase. Follow the steps below to insert and charge the battery pack. To insert the battery pack 1 Make sure that the Lock lever on the bottom of the computer is on the Release position. 2 Align the grooves on the battery with the tabs and notches on the back of the computer, and then slide the battery towards the computer until it clicks into place. 3 Slide the lock lever into the LOCK position to secure the battery on the computer. 1 LOCK UNLOCK 2 Battery pack Grooves 3 LOCK UNLOCK