Views
7 months ago

Sony CDX-C910RDS - CDX-C910RDS Istruzioni per l'uso Francese

Sony CDX-C910RDS - CDX-C910RDS Istruzioni per l'uso Francese

Getting Started

Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Press the RESET button with a pointed object, such as a ballpoint pen. Front panel detached Notes • Do not put anything on the inner surface of the front panel. • Be sure not to drop the panel when detaching it from the unit. • If you detach the panel while the unit is still on, the power will turn off automatically to prevent the speakers from being damaged. • When you carry the front panel with you, put it in the supplied front panel case. • Do not expose the front panel to direct sunlight, heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight where there may be a considerable rise in temperature. Attaching the front panel Align part A of the front panel to part B of the unit as illustrated, and push until it clicks. RESET button EN Front panel slid down RESET button B A Notes • When you connect the power supply cord to the unit or reset the unit, wait for about 10 seconds before you insert a disc. Do not insert a disc within these 10 seconds, otherwise, the unit will not be reset. • Pressing the RESET button will erase the clock and some memorised functions. Detaching the front panel You can detach the front panel of this unit to prevent the unit from being stolen. 1 Press (OFF). 2 Press (RELEASE) to open up the front panel. Then slide the front panel a little to the left, and pull it off towards you. (OFF) Notes • Be sure not to attach the front panel upside down. • Do not press the front panel hard against the unit when attaching it. Press it lightly against the unit. • Do not press hard or put excessive pressure on the display windows of the front panel. Caution alarm If you turn the ignition key switch to the OFF position without removing the front panel, the caution alarm will beep for a few seconds (only when the POWER SELECT switch on the bottom of the unit is set to the A position). TIR indicator If you pull out the ignition key while the TIR function is on, the TIR indicator flashes a few times. TIR indicator For more information on the TIR function, refer to “Recording the traffic announcements” (page 12). 4 (RELEASE) Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)

Preparing the rotary remote When you mount the rotary remote, attach the label in the illustration below. Setting the clock The clock has a 24-hour digital indication. Example: Set the clock to 10:08 1 Press (SHIFT), then press (2) (SET UP). EQ SUR Set up Clock DSPL SOUND LIST LIST SOUND DSPL 1 Press (4) (n). EQ SUR The hour digit flashes. 005 2 Set the hour. Set up 1:‚‚ to go back EQ 3 Press (4) (n). EQ SUR SUR to go forward Set up 1‚:‚‚ Set up 1‚:‚‚ EN Getting Started The minute digits flash. 005 4 Set the minute. to go back to go forward EQ SUR Set up 1‚:‚8 2 Press (SHIFT). EQ SUR 1‚:‚8 The clock starts. Note If the POWER SELECT switch on the bottom of the unit is set to the B position, turn the power on first, then set the clock. To turn the power on, press (SOURCE). 5 Actual total number: Sony CDX-C910RDS (E,F,G) 3-856-717-11(2)