Views
1 week ago

Sony SCD-XB770 - SCD-XB770 Istruzioni per l'uso Inglese

Sony SCD-XB770 - SCD-XB770 Istruzioni per l'uso Inglese

Hooking Up the Audio

Hooking Up the Audio Components Getting Started Connecting via ANALOG 2CH OUT jacks Use an audio connecting cords for this connection. Connect the ANALOG 2CH OUT L/R jacks to the CD (SACD) input jacks of your amplifier. Be sure to match the colour-coded pin to the appropriate jacks: white (left) to white and red (right) to red. Audio connecting cords (Red and White) (not supplied*) White (L) Red (R) White (L) Red (R) * If you do not make the ANALOG 5.1 CH connection (page 5), you can use the supplied audio connecting cable for the ANALOG 2CH connection. ANALOG DIGITAL(CD) 2CH OUT 5.1CH OUT OUT FRONT SURR COAXIAL OPTICAL CENTER L L R R SUB WOOFER To CD (SACD) IN jacks (L/R) Stereo amplifier, etc. 6

Connecting via DIGITAL (CD) OUT OPTICAL connector Use an optical digital cable for this connection. When connecting the optical digital cable to the DIGITAL (CD) OUT OPTICAL connector, take the cap off the connectors and push the cable plugs in until they click into place. Be careful not to bend or twist the optical cable. Optical digital cable (not supplied) Getting Started Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting via DIGITAL (CD) OUT COAXIAL connector Use a coaxial digital cable to connect the audio components equipped with coaxial digital input connectors. Coaxial digital cable (not supplied) Note Only the audio signals of conventional CDs can be output from the DIGITAL (CD) OUT connectors. Those of the Super Audio CD cannot be output through DIGITAL (CD) OUT. Connecting the AC power cord Connect the AC power cord to a wall outlet. 7