Views
6 months ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Indicators on the

Indicators on the display panel A Input indicator Lights up to indicate the current input. HDMI The receiver recognizes the equipment connected via an HDMI IN jack. ARC TV input is selected and the Audio Return Channel (ARC) signals are detected. COAX Digital signal is input through the COAXIAL jack (page 78). OPT Digital signal is input through the OPTICAL jack (page 77). B PARTY Lights up when PARTY STREAMING function is activated (page 66). C S.OPTIMIZER Lights up when Sound Optimizer function is activated (page 53). D D.C.A.C. Lights up when the measurement results of the “Auto Calibration” function are applied. E TrueHD* Lights up when the receiver is decoding Dolby True HD signals. F DTS(-HD) indicator* Lights up the respective indicator when the receiver is decoding the corresponding DTS format signals. DTS DTS DTS-HD DTS-HD G Speaker system indicator (page 34) H Tuning indicator ST Lights up when the receiver tunes to a stereo broadcast. MEM Lights up when memory function, such as Preset Memory (page 48), etc., is activated. I SLEEP Lights up when the Sleep Timer is activated (page 14). J EQ Lights up when the equalizer is activated. K D.L.L. Lights up when the D.L.L. (Digital Legato Linear) function is activated (page 86). L D.R.C. Lights up when dynamic range compression is activated (page 87). M NEO:6 Lights up when DTS Neo:6 Cinema/ Music decoding is activated (page 51). 10 GB

N Dolby Pro Logic indicator Lights up the respective indicator when the receiver performs Dolby Pro Logic processing. This matrix surround decoding technology can enhance input signals. PL Dolby Pro Logic PL II Dolby Pro Logic II PL IIx Dolby Pro Logic IIx PL IIz Dolby Pro Logic IIz Note These indicators may not light up depending on the speaker pattern setting. O A.P.M. Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the DCAC (Digital Cinema Auto Calibration) function (page 32). P UPDATE Lights up when a new software is available (page 70). Q Wireless LAN signal strength indicator Lights up to show the strength of the wireless LAN signal (page 37, 38). No signal. The signal strength is weak. The signal strength is moderate. The signal strength is strong. R Wired LAN indicator Lights up when LAN cable is connected. S USB Lights up when iPod/iPhone or USB device is detected. * When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and that INPUT MODE is not set to “Analog” (page 77) or “Analog Direct” is not selected. 11 GB