Views
1 week ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

* When you connect a

* When you connect a subwoofer with an auto standby function, turn off the function when watching movies. If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output. ** Notes on the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals connection. – If you connect only one surround back speaker, connect it to L of this terminals. – If you have an additional front speaker system, connect them to this terminals. Set the “SB Assign” to “Speaker B” in the Speaker Settings menu (page 84). You can select the front speaker system you want by using the SPEAKERS button on the receiver (page 34). – You can connect the front speakers to this terminals using bi-amplifier connection (page 22). Set the “SB Assign” to “Bi-Amp” in the Speaker Settings menu (page 84). Bi-amplifier connection If you are not using surround back speakers and front high speakers, you can connect the front speakers to the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals using a biamplifier connection. Front speaker (Right) Front speaker (Left) Note After you have installed and connected your speaker, be sure to select the speaker pattern from the Speaker Settings menu (page 82). Connect the jacks on the Lo (or Hi) side of the front speakers to the SPEAKERS FRONT A terminals, and connect the jacks on the Hi (or Lo) side of the front speakers to the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals. Make sure that metal fittings of Hi/Lo attached to the speakers have been removed from the speakers to avoid receiver malfunction. After you have made the bi-amplifier connection, set the “SB Assign” to “Bi- Amp” in the Speaker Settings menu (page 84). 22 GB

3: Connecting the TV You can watch the selected input image when you connect the HDMI TV OUT or MONITOR OUT jack to a TV. You can operate this receiver using a OSD (On-Screen Display) if you connect HDMI TV OUT jack to a TV. Before connecting cords, be sure to disconnect the AC power cord (mains lead). Connections Audio signals TV Video signals Audio/Video signals or ARC A** B** C D* A Optical digital cord (not supplied) B Audio cord (not supplied) C Video cord (not supplied) D HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or Sony HDMI cable. Recommended connection Alternative connection 23 GB