Views
1 week ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Setting up a wireless

Setting up a wireless network using the WPS PIN code method If the access point supports the WPS PIN (Personal Identification Number) code connection, you can set up a WPS wireless connection by entering the receiver’s PIN code into the wireless LAN router/access point. 1 Select “Manual Registration” in step 2 in “Searching for an access point and setting up a wireless network (Access Point Scan method)” (page 36). 2 Press V/v repeatedly to select “WPS PIN”, then press . The available SSID (access point) list appears. 3 Press V/v repeatedly to select the network name (SSID) you want, then press . The PIN code (8 digits) of the receiver appears on the TV screen. Leave the PIN code displayed until the connection is complete. (A different PIN code is displayed each time you perform this operation.) 4 Input the receiver’s PIN code into the wireless LAN router/access point. The receiver starts the network settings. “Completed” appears after the network settings are complete and “ ” lights up on the display panel. To return to the Network Settings menu, press . (Depending on the network environment, the network settings may take some time.) 5 Perform the server settings. To listen to audio content stored on the server, you need to set up your server (page 55). Tips • When checking the network settings, see “Information” (page 90). • For details on entering the PIN code into the wireless LAN router/access point, refer to the operating instructions of the wireless LAN router/access point. If you cannot find the network name (SSID) you want (manual setup method) You can input the network name (SSID) you want manually if it does not appear on the list. 1 Select “Manual Registration” in step 2 in “Searching for an access point and setting up a wireless network (Access Point Scan method)” (page 36). 2 Press V/v repeatedly to select “Direct Input”, then press . 3 Enter the network name (SSID), then press . 4 Press V/v repeatedly to select the security setting you want, then press . 5 Follow steps 4 to 7 in “Searching for an access point and setting up a wireless network (Access Point Scan method)” (page 36). Guide to on-screen display (OSD) operation You can display the menu of the receiver on the TV screen and select the function you want to use on the TV screen by pressing V/v/B/b and on the remote control. When you start operating the receiver, make sure to press AMP on the remote control first. Otherwise, operations that follow may not be aimed at the receiver. 38 GB

AMP 3 Press V/v repeatedly to select a menu you want, then press to enter the menu. The menu item list appears on the TV screen. Example: When you select “Watch”. RETURN O Using the menu V/v/B/b, OPTIONS HOME 1 Switch the input of the TV so that an image of the menu is displayed. 2 Press HOME. The home menu is displayed on the TV screen. Depending on the TV, the home menu may take some time to appear on the TV screen. 4 Press V/v repeatedly to select the menu item you want to adjust, then press to enter the menu item. 5 Repeat steps 3 and 4 to select the parameter you want. Tip When “OPTIONS” appears in the lower right portion of the OSD, you can display the function list by pressing OPTIONS and selecting a related function. To return to the previous screen Press RETURN O. To exit the menu Press HOME to display the home menu, then press HOME again. Preparing the Receiver 39 GB