Views
1 week ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

• COAX: Specifies the

• COAX: Specifies the digital audio Example: signals input to the DIGITAL When you connect the DVD player to the COAXIAL jack. OPTICAL IN 1 (SAT/CATV) jack. • Analog: Specifies the analog audio – Assign the OPTICAL IN 1 (SAT/CATV) signals input to the AUDIO IN (L/R) jack to “DVD”. jacks. 1 Select “Settings” from the home Notes menu, then press . • Based on the input, “------” appears on the The Settings menu list appears on the display panel, and other modes cannot be selected. TV screen. • When “Analog Direct” is being used, audio 2 Select “Input Settings”, then press input is set to “Analog”. You cannot select other modes. . 3 Select “Audio Input Assign”, then press . Using other audio input 4 Select the input name you want to assign, then press . jacks 5 Select the audio signals you want (Audio Input Assign) to assign to the input which you selected in step 4 using V/v/B/b. You can reassign the digital input jacks to other input if the default settings of the 6 Press . jacks do not correspond to your connected equipment. After you have reassigned the input jacks, you can use the input button (or INPUT SELECTOR on the receiver) to select the equipment you connected. Input name BD DVD GAME SAT/ VIDEO SA-CD/ CATV CD Assignable OPT 1 a a a a* a a audio input jacks OPT 2 a a a a a a COAX a a a a a a* None a* a* a* a a* a * Default setting Notes • When you assign the digital audio input, the INPUT MODE setting may change automatically. • One reassignment is allowed for each input. 78 GB

Using a bi-amplifier connection 1 Select “Settings” from the home menu, then press . The Settings menu list appears on the TV screen. 2 Select “Speaker Settings”, then press . 3 Select “Speaker Pattern”, then press . 4 Select the appropriate speaker pattern so that there are no surround back speakers and front high speakers, then press . 5 Select “SB Assign”, then press . 6 Select “Bi-Amp”, then press . The same signals output from the SPEAKERS FRONT A terminals can be output from the SPEAKERS SURROUND BACK/ BI-AMP/ FRONT HIGH/ FRONT B terminals. To exit the menu Press HOME. Reverting back to the factory default settings You can clear all memorized settings and revert the receiver back to the factory default settings by performing the following procedure. This procedure can also be used to initialize the receiver before you use it for the first time. Be sure to use the buttons on the receiver to perform this operation. ?/1 1 Press ?/1 to turn off the receiver. 2 Hold down ?/1 for 5 seconds. The “CLEARING” appears on the display panel for a while, then changes to “CLEARED!”. Changes or adjustments made to the settings are now reset to the defaults. Notes • Set the “SB Assign” to “Bi-Amp” before you perform Auto Calibration. • If you set the “SB Assign” to “Bi-Amp”, the speaker level and distance settings of the surround back speakers and front high speakers become invalid, and those of the front speakers are used. Note It takes about a few minutes for the memory to be cleared completely. Do not turn the receiver off until “CLEARED!” appears on the display. Other Operations 79 GB