Views
1 week ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

x Crossover Freq.

x Crossover Freq. (Speaker crossover frequency) Lets you set the bass crossover frequency of speakers that the speaker size has been set to “Small” in the Speaker Settings menu. Measured speaker crossover frequency is set for each speaker after the Auto Calibration. 1 Select the parameter under the speaker on the screen for which you want to adjust the crossover frequency, then press . 2 Adjust the value, then press . x Test Tone Lets you select the test tone type on the “Test Tone” screen. Tips • To adjust the level of all speakers at the same time, press 2 +/–. You can also use MASTER VOLUME on the receiver. • The adjusted value is shown on the TV screen during adjustment. To output test tone from each speaker You can output test tone from the speakers in sequence. 1 Select “Test Tone”, then press . 2 Select the type of test tone or speaker you want, then press . • Off: The test tone is output from each speaker manually. • Auto: The test tone is output from each speaker in sequence. • Fix FL, Fix FR, Fix CNT, Fix SL, Fix SR, Fix SB*, Fix SBL, Fix SBR, Fix LH, Fix RH, Fix SW: You can select which speakers will output the test tone. 3 Adjust the speaker level for manual test tone, then press . * “Fix SB” appears when only one surround back speaker is connected. x Distance Unit Lets you select the unit of measurement for setting distances. • feet: The distance is displayed in feet. • meter: The distance is displayed in meters. Audio Settings menu You can adjust settings for the audio to suit your preference. x D.L.L. (Digital Legato Linear) The D.L.L. function is Sony proprietary technology that allows low quality digital audio signals and analog audio signals to be played back with high quality sound. • Auto 1: This function is available for lossy compression audio formats and analog audio signals. • Auto 2: This function is available for Linear PCM signals, as well as lossy compression audio formats and analog audio signals. •Off Notes • This function may not work, depending on the content via a USB device, or a home network. • This function works when “A.F.D. Auto”, “Multi Stereo”, “2ch Stereo”, or “Headphone (2ch)” is selected. However, this function does not work in the following cases. – “FM TUNER” or “AM TUNER” input is selected. – Linear PCM signals with a sampling frequency of other than 44.1 kHz are being received. – Dolby Digital Plus, Dolby Digital EX, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. – During network function, signals with a sampling frequency of other than 44.1 kHz is being received. 86 GB

x Sound Optimizer Lets you enjoy clear and dynamic sound at low volume levels. For details, see “Using the Sound Optimizer function” (page 53). •Normal •Low •Off x Equalizer Lets you adjust the bass and treble level for each speaker. For details, see “Adjusting the Equalizer” (page 53). x Sound Field Lets you select a sound effect applied to input signals. For details, see “Enjoying Sound Effects” (page 50). x A/V Sync. (Synchronizes audio with video output) Lets you delay the output of audio to minimize the time gap between audio output and visual display. This function is useful when you use a large LCD or plasma monitor or a projector. • HDMI Auto: The time gap between audio output and visual display for the monitor connected via an HDMI connection will be adjusted automatically based on the information for the TV. This feature is available only when the monitor supports the A/V Sync function. • 0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Notes • This function does not work when “Analog Direct” is being used. • The delay time may vary depending on audio format, sound field, speaker pattern and speaker distance settings. x Auto Volume This receiver can adjust the volume automatically depending on the input signal or content from the connected equipment. This function is useful, for example, when the sound of a commercial is louder than the TV programs. •On •Off Notes • Be sure to reduce the volume level before you turn on/off this function. • As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. • This function does not work in the following cases. – Linear PCM signals with a sampling frequency of more than 48 kHz are being received. – Dolby Digital Plus, Dolby TrueHD, DTS 96/ 24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. x Dual Mono (Digital broadcast language selection) Lets you select the language you want when you listen to the dual audio of a digital broadcast when available. This feature only functions for Dolby Digital sources. • Main/Sub: Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. • Main: Sound of the main language will be output. • Sub: Sound of the sub language will be output. x D.Range Comp. (Dynamic Range Compression) Lets you compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at low volumes late at night. Dynamic range compression is possible with Dolby Digital sources only. • On: The dynamic range is compressed as intended by the recording engineer. • Auto: The dynamic range is compressed automatically. Adjusting Settings 87 GB