Views
1 week ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Supplied accessories •

Supplied accessories • Operating Instructions (this manual) (Australia and Mexico models only) • Quick Setup Guide (1) • Remote control (RM-AAU169) (1) • R6 (size AA) batteries (2) • Reference Guide (1) (Europe model only) • FM wire antenna (aerial) (1) Inserting batteries into the remote control Insert two R6 (size-AA) batteries (supplied) in the remote control. Observe the correct polarity when installing batteries. • AM loop antenna (aerial) (1) • Optimizer microphone (ECM-AC2) (1) Notes • Do not leave the remote control in an extremely hot or humid place. • Do not use a new battery with old ones. • Do not mix manganese batteries and other kinds of batteries. • Do not expose the remote control sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction. • If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. • When you replace the batteries, the remote control buttons may be reset to their default settings. If this happens, reassign the input buttons (page 97). • When the receiver no longer responds to the remote control, replace all the batteries with new ones. 8 GB

Description and location of parts Front panel A ?/1 (on/standby) (page 32, 48, 54) The indicator above the button lights up as follows: Green: The receiver is turned on. Amber: The receiver is in standby mode, and – Either “Control for HDMI” (page 88), or “Network Standby” (page 90) is set to “On”. – “Pass Through” (page 88) is set to “On”* or “Auto”. Lights off when the receiver is in standby mode and “Control for HDMI”, “Pass Through”, and “Network Standby” are set to “Off”. * For Australia and Mexico models only. Note If the indicator flashes slowly, the software update is in progress (page 70). If the indicator flashes in quick succession, the software update has error (page 99). B SPEAKERS (page 34) C TUNING MODE, TUNING +/– Press TUNING MODE to operate a tuner (FM/AM). Press TUNING +/– to scan a station. D A.F.D./2CH, MOVIE, MUSIC (page 50, 51) E Display panel (page 10) F SOUND OPTIMIZER (page 53) G INPUT MODE (page 77) H DIMMER Adjusts the brightness of the display panel in 3 levels. I DISPLAY (page 96) J Remote control sensor Receives signals from remote control. K PURE DIRECT (page 54) The indicator above the button lights up when PURE DIRECT is activated. L MASTER VOLUME (page 41) M INPUT SELECTOR (page 41) N (USB) port (page 28) O AUTO CAL MIC jack (page 33) P PHONES jack Connects to headphones. 9 GB