Views
5 months ago

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

Sony STR-DN840 - STR-DN840 Istruzioni per l'uso Inglese

a) You can select this

a) You can select this setting only when you have performed the Auto Calibration and saved the settings. b) Depends on the speaker pattern setting, some parameters or settings may not be available. c) xxx represent a speaker channel (FL, FR, CNT, SL, SR, SB, SBL, SBR, LH, RH, SW). d) You can only select this parameter if “SP PATTERN” is not set to a setting with surround back or front high speakers (page 84). e) You can only select this parameter if your speaker is set to “SMALL”. f) You can only select this parameter if you select “HD-D.C.S.” as sound field. g) For Australia and Mexico models only. h) x.xxx represent a version number. To view the information on the display panel The display panel provides various information of the receiver status such as sound field. 1 Select the input for which you want to check the information. 2 Press AMP, then press DISPLAY repeatedly. Each time you press DISPLAY, the display will change cyclically as follows. Index name of the input 1) t Input you selected t Sound field currently applied 2) t Volume level t Stream information 3) 1) Index name appears only when you have assigned one to the input or preset station. Index name does not appear when only blank spaces have been entered or it is same as the input name. 2) “PURE.DIRECT” appears when Pure Direct function is activated. 3) Stream information may not be displayed. Note Character or marks may not be displayed for some languages. When listening to FM and AM radio Preset station name 1) t Frequency t Sound field currently applied 2) t Volume level When receiving RDS broadcast (Europe and Australia models only) Program Service name or preset station name 1) t Frequency, band and preset number t Sound field currently applied 2) t Volume level 96 GB

Using the Remote Control Reassigning the input button You can change the default settings of the input buttons to suit the equipment in your system. For example, if you connect a Bluray Disc player to the SAT/CATV jack on the receiver, you can set the SAT/CATV button on this remote control to control the Blu-ray Disc player. Note You cannot reassign the TV, FM, AM, USB, HOME NETWORK, SEN input buttons. Numeric buttons TV ?/1 Input buttons 1 While holding down the input button of which you want to change the assignment, hold down TV ?/1. Example: While holding down SAT/CATV, hold down TV ?/1. 2 With the TV ?/1 button held, release the input button. Example: With the TV ?/1 button held, release SAT/CATV. 3 Referring to the following table, press the corresponding button for the category you want, then release TV ?/1. Example: Press 1, then release TV ?/1. Now you can use the SAT/CATV button to control the Blu-ray Disc player. Categories Blu-ray Disc player 1 (command mode BD1) a) Blu-ray Disc recorder 2 (command mode BD3) a) DVD player 3 (command mode DVD1) DVD recorder 4 (command mode DVD3) b) VCR 5 (command mode VTR3) c) CD player 6 Press a) For details on the BD1 or BD3 setting, refer to the operating instructions supplied with the Blu-ray Disc player or Blu-ray Disc recorder. b) Sony DVD recorders are operated with a DVD1 or DVD3 setting. For details, refer to the operating instructions supplied with the DVD recorders. c) Sony VCRs are operated with a VTR 3 setting which corresponds to VHS. Using the Remote Control 97 GB