Your Poolcare Solution Instruction Manual La solution ... - Poolmaid

6.
Important Safety Instructions:
When installing and using this electrical equipment, basic safety precautions should
always be followed, including the following:
1. Read and follow all instructions
. WARNING - To reduce the risk of injury, do not permit children to use this product
unless they are closely supervised at all times.
. WARNING - Risk of Electric Shock. Connect only to a grounding-type receptacle
protected by a ground-fault circulation-interrupter (GFCI). Contact a qualified
electrician if you cannot verify that the receptacle is protected by a GFCI.
. Do not bury cord. Locate cord to minimize abuse from lawn mowers, hedge trimmers,
and other equipment.
5. WARNING - To reduce risk of electric shock, replace the damaged cord immediately.
6. WARNING - To reduce risk of electric shock, do not use extension cord to connect
unit to electric supply; provide a properly located outlet.
7. SAVE THESE INSTRUCTIONS
Caution:
Natural rock or water features in contact with salt water can cause a white stain
(salt crystalisation).
Please do not use any salt with additives such as iodine. Please ensure that if
you have a ladder, it is of high-grade stainless steel.
2. How the system works
•
•
•
This innovative and inexpensive system produces your required chlorine from
ordinary salt.
Through the process of electrolysis, the chlorinator separates the elements of salt,
chlorine and sodium, in the pool water.
The chlorine is immediately absorbed, thereby destroying bacteria, algae and
sanitising the pool.
3. Installation of the Salt Chlorinator cell
•
•
•
The complete installation must be approved by a certified electrician before it is
connected to the mains.
Please ensure steps are followed in sequential order
If you have ANY questions, please phone or contact your supplier/dealer.