Brand comparisons
Brand comparisons Uncompromising quality REGO-FIX treatment for longer life Hi-Q ® / ER clamping nuts with corrosionresistant surface are standard. Up to 40 % higher clamping force. Competitors ER ER clamping nuts nuts Bare metallic clamping nut: standard competitor product. Special surface treatment for for longer life life . . ER collets ER collets Surface Finish Surface is Finish the key is the key Hi-Q ® / ER clamping nut after 100 clamping cycles Bare metallic clamping nut after 15 clamping cycles Black oxidised clamping nut after 15 clamping cycles Black Oxide Nut (30 cycles) Super finish Super Ra 0.04 finish reduces Ra 0.04 friction reduces and friction increases and contact increases area. contact area. All REGO-FIX ER collets are manufactured to the highest quality Hi-Q Nut standards, (100 cycles) in terms of surface quality and concentricity. Magnified Magnified Surface Finish Surface Profile Finish View: Profile View: Standard Metal Metal Nut Nut (15 (15 cycles) cycles) Standard ER collet (Competitor) Black Black Oxide Oxide Nut Nut (30 (30 cycles) cycles) Hi-Q Hi-Q Nut Nut (10 Surface shown REGO-FIX schematically collet REGO-FIX collet Event, Event, place place / 00.00.2019 / 00.00.2019 / © REGO-FIX / © REGO-FIX AG AG Competitor Surface collet shown Competitor schematically collet Surface roughness R a = 0.04 Surface roughness R a = 0.276 Chatter pattern REGO-FIX (workpiece surface) Chatter pattern competitor (workpiece surface) Event, place / 00.00.2019 Event, / © place REGO-FIX / 00.00.2019 AG / © REGO-FIX AG System comparison ER systems The systems concentricity at 3 x D (Ø 12 mm carbide test rod) and the transferrable torque were measured for REGO-FIX as well as for two commercially available products. System runout @ 3 x D 20 µm 15 µm 10 µm 5 µm 14 µm 100 Nm 89 Nm 18 µm 82 Nm Transferrable torque 75 Nm 50 Nm 57 Nm 25 Nm 0 µm 3 µm REGO-FIX 0 Nm Product 1 Product 2 REGO-FIX Product 1 Product 2 Result ✓ Long tool life and best results through minimised concentricity errors ✓ Optimum milling results due to balanced system components ✓ Perfectly matched ER components result in minimum concentricity errors and high power transmission REGO-FIX AG Obermattweg 60 / 4456 Tenniken / Switzerland www.rego-fix.com ENG 2311 036200270 _ER_Flyer
