9. Maintenance // After
9. Maintenance // After each use, the adapter should be cleaned with a lint-free cloth and stored with a thin layer of oil applied for corrosion protection. // After each use, the plane surfaces and thread of the basic unit should be cleaned with a lint-free cloth and stored with a thin layer of oil applied for corrosion protection. // To increase the longevity of the battery installed in the basic device, we recommend charging the battery early (state of charge >20%) and charge it to 100% at least once a year. // Do not use aggressive detergents – particularly on the basic unit’s housing/foil. 10. Calibration To maintain the reliability, precision and service life of the measurement system, we recommend sending the device in its original case to a qualified service centre in the following cases: // For annual servicing // If dropped or exposed to severe shocks // If the measuring range permitted is exceeded Please contact info@rego-fix.com for further information. The calibration certificate is always available on the website (www.rego-fix.com/en/toolid). Simply scan the QR code on the back of the device or enter the URL above into your browser and follow the instructions. Operating manual REGO-FIX ForceMaster (FMA) 21
11. Disposal The basic unit is suitable for commercial use (B2B) in accordance with WEEE Directive 2012/19/EU and therefor may not be disposed of in household waste or at public disposal centres. For a fee, we can take the basic unit back for proper sorting and disposal in accordance with applicable guidelines. Please send it back in the original case to prevent damage particularly to the rechargeable battery during transport. 22 Operating manual REGO-FIX ForceMaster (FMA)
