600346029 DTM04 Dometic tank monitor system manual

waeco.com

600346029 DTM04 Dometic tank monitor system manual

Dometic Tank Monitor SystemTable of contentsNotes on using the manualEN1 Notes on using the manual ................................................ 72 General safety instructions ................................................ 73 Intended use .........................................................7 - 84 Components ........................................................... 85 Specifications ........................................................8 - 96 Installation ..........................................................9 - 107 Operation. ............................................................ 118 Warranty and Product Liability .........................................11 - 121 Notes on using the manualCaution!Safety Instruction: Failure to observe this instruction can cause material damage andimpair the function of the device.NoteSupplementary information for operating the device.fig. 2A, page 2 : This refers to an element in an illustration. In this example, item A infigure 2 on page 2.2 General safety instructionsThe manufacturer will not be held liable for claims for damage resulting from the following:• Faulty assembly or connection• Damage to the unit from mechanical influences, misuse or abuse• Float switches fouled with tissue paper• Alterations to the unit without express written permission from the manufacturer• Use for purposes other than those described in this manual3 Intended use3.1 OPTION 1: DTM04 tank monitor systemDTM04 Tank Monitor System provides electronic monitoring of the liquid level inside a holding tank.Three float switches inside the tank activate a set of four lights on an indicator panel. The lights indicateEmpty, Low, Mid and Full levels. The Full level indicates when the liquid level is within 51 mm (2 in.) ofthe top of the holding tank. The other float switches are connected to adjustable probe stems whichcan be positioned according to the tank height and the desired indicator panel readings.3.2 OPTION 2: DTM04 tank monitor system with “full tank” shut-down relayWhen the optional “Full Tank” Shut-down Relay (available separately) is connected to the DTM04 panel,and the holding tank reaches the Full level, the relay shuts off power to the electric toilet. This preventsuse of the toilet and the possibility of overfilling the holding tank. See Components for “Full Tank” ShutdownRelay item numbers. The relay handles a maximum electrical current of 30 amps.7

More magazines by this user
Similar magazines