SinePower MSI912, MSI924, MSI1312, MSI1324, MSI1812 ... - Waeco

Connecting the inverterSinePower9.8 Connecting the external switch for turning on andoffINOTEUse cables with a cable cross section of 0.25 – 0.75 mm².You can use the following as an external switch:• external switch, voltage supply from the inverter: fig. 0, page 7• Control unit with relay or transistor circuit (TR): fig. a, page 7• external switch with voltage supply from the battery (BAT) of the vehicle:fig. b, page 7• external switch with its own voltage supply (DC POWER) e.g. from the ignition:fig. c, page 7➤ Set the main switch (fig. 6 1, page 4 and fig. 7 1, page 5) to “OFF” andmake sure that the connection for the remote control (fig. 5 2, page 4) isnot assigned.➤ Set the main switch (fig. 6 1, page 4 and fig. 7 1, page 5) to “RE-MOTE”.➤ Connect the external on/off switch with the connection cable to the terminal(fig. 5 1, page 4).50EN