OS5851L-BR Manual de Instruções Modelo ... - Oregon Scientific
OS5851L-BR Manual de Instruções Modelo ... - Oregon Scientific
OS5851L-BR Manual de Instruções Modelo ... - Oregon Scientific
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
086L004968-026<br />
28/75<br />
REV:1<br />
LIGHT SIGNALS<br />
EN<br />
The charge/in use & incoming call/in use indicator will change un<strong>de</strong>r the following<br />
conditions.<br />
CHARGE/IN USE LED on the base<br />
Talking<br />
Charging<br />
Incoming call<br />
Paging<br />
Voice mail<br />
Lit steadily<br />
Lit steadily<br />
Flashes in same pattern as telephone ring<br />
Flashes every 0.5 second<br />
Flashes every 1 second<br />
INCOMING CALL/IN USE LED on the handset<br />
Talking<br />
Lit steadily<br />
Paging<br />
Flashes every 1 second<br />
Low battery<br />
Flashes every 15 seconds<br />
Incoming call<br />
Flashes in same pattern as telephone ring<br />
LCD SCREEN MESSAGES<br />
The following indicators show the status of a message or of the phone.<br />
BLOCKED NUMBER/<br />
NAME/CALLER<br />
EMPTY<br />
ERROR<br />
ENTER NAME<br />
ENTER TEL NUM<strong>BR</strong><br />
DELETE ALL<br />
DELETE<br />
END OF LIST<br />
HANDSET 1<br />
INCOMPLETE DATA<br />
The person is calling from a number that has been blocked from<br />
transmission.<br />
There is no record stored to the selected directory location.<br />
Caller information has been interrupted during transmission or the<br />
phone is excessively noisy.<br />
Prompt telling you to enter name in directory.<br />
Prompt to enter the telephone number for directory.<br />
Prompt asking you if you want to erase all Caller ID information.<br />
Prompt asking you if you want to erase the current Caller ID entry<br />
or a directory entry that is shown on screen.<br />
Indicates that there is no additional information in Caller ID list.<br />
This handset is handset 1.<br />
The telephone provi<strong>de</strong>r did not send all Caller ID information<br />
because the signal was weak or the call was interrupted.<br />
24