EC TYPE EXAMINATION CERTIFICATE

Page 4 / 4Certificate number: 09751/A0 EC6. MARKING OF PRODUCT :6.1 - As per EN 1866, paragraph 10 :1 - Model designation2 - Manufacturer's name and address3 - Type of fire for which the extinguisher is suitable, i.e. : A and B4 - Type and quantity of extinguishing medium, i.e. : Water 45 litres5 - Identification and quantity of additives : Orchydée SC1; FILMFOAM 211; FORAFAC 1203: 0.9 litres6 - Propelling gas : CO2 ; 450 g7 - Instruction for use and recharge (in pictorial form)8 - Year of manufacture9 - Temperature range over which the extinguisher will operate satisfactorily, i.e. : +5°C to+ 60°C10 - Test pressure, i.e. : 24 bar11 - Discharge time, i.e. : 90 s6.2 - Markings as per MED 96/98/EC :¤ YYYY/XX where YYYY is the number of the Notified Body undertaking surveillance module (when BV, 0062) and whereXX are the last two digits of year mark affixed.7. OTHERS :This approval is given on the understanding that the manufacturer will accept full responsibility for informing shipbuilders ortheir sub-contractors of the proper methods of fitting and general maintenance of the approved equipment and the conditions ofthis approval.*** END OF CERTIFICATE ***BV Mod. Ad.E 536 May 2009This certificate consists of 4 page(s)