2016 Product Guide

Alliance Remedial Supplies Ltd 

Suppliers of specialist building materials 

and renovation treatment products 

DAMP PROOFING 

WATERPROOFING 

SURFACE COATINGS 

MOULD & 

CONDENSATION 

EPOXY MATERIALS 

BRICK REPAIRS 

TIMBER 

TREATMENTS 

RYTONS VENTS 

BUILDING 

MATERIALS 

DRAINAGE 

allianceremedialsupplies.co.uk 

01329 235252 

Call: 01329 235252 for FREE technical advice or visit our website for product downloads - www.allianceremedialsupplies.co.uk 

E&EO. Prices correct at time of publication and are subject to change without notice. Images are for illustration purposes only.

About Us 

Alliance Remedial Supplies Ltd was set up in 2011 to offer general 

builders, tradesmen, architects, self builders, landlords and DIY 

homeowners good quality specialist products for damp proofing, basement tanking, 

woodworm treatments, ventilation and much more at competitive prices that are used in 

property repair, renovation and improvement. 

We are a no frills business choosing to keep things simple and affordable which enables us to 

pass on much of our negotiated trade discounts to our customers. Our prices are among the 

best to be found on the internet. 

We are proud supply partners to the Landlords National Property Group, Portsmouth & 

District Private Landlords Association and projects featured on national TV such as 

Restoration Man and Amazing Spaces. 

We have a trade counter commercial unit based in Gosport, Hampshire, PO13 0FJ. 

Customers can call in to purchase any of the products featured on our website from stock 

including other everyday property repair and renovation products used by trades that we 

have not included on our website. 

What Makes Us Different? 

Our added value is that we offer technical information and support for your project. This 

often involves going to a site to look at a project and advise on a suitable course of remedial 

action. Site meetings are carried out locally in all areas of Hampshire including Fareham, 

Portsmouth, Southampton, Winchester and into neighbouring counties, West Sussex, Surrey 

and Dorset along with London and Kent. 

So far we have had the opportunity to supply to major developers, specialist contractors, 

international clients, landlords, homeowners and proudly, to the Portsmouth Historic Naval 

Dockyard. In addition to a range of products, we provide 

basement waterproofing design and specification 

services for builders, developers and homeowners. 

Please call 01329 235252 for more details 

2 

Alliance Remedial Supplies Ltd, Unit 2 Glenmore Business Centre, Aerodrome Road, Gosport, Hampshire, PO13 0FJ 

Tel: 01329 235252, Email: info@allianceremedialsupplies.co.uk, Web: www.allianceremedialsupplies.co.uk

CONTENTS 

CONTENTS 

DAMP PROOFING 4 

DPC CREAM 

DAMP PROOF PAINT 

ADMIXTURES 

SURFACE COATINGS 19 

BRICK SEALER 

SALT REMOVER 

ALGAE REMOVER 

DRY ROT 

ROOF PAINT 

EPOXY PRODUCTS 26 

FLOOR PAINT 

SEALERS 

CONCRETE REPAIRS 

CLEANERS 

EXTERNAL EPOXY 

TIMBER TREATMENTS 28 

WOODWORM KILLER 

DUAL PURPOSE TREATMENT 

BORON TREATMENTS 

ROTAFIX 

BUILDING MATERIALS 34 

SEALENTS 

TANKING SLURRY KITS 

BOND IT SBR 

WATER PROOFING 9 

TANKING 

MEMBRANES 

PAINTS 

FIXING PLUGS 

TAPES 

DRAINAGE 

CONSTRUCTION JOINT 

ROOFING 

MOULD AND CONDENSATION 21 

ANTI MOULD TREATMENTS 

ANTI CONDENSATION PAINT 

EASYVENT LOFT VENTILATION 

VECTAIRE EXTRACT FANS 

KAIR SINGLE ROOM HEAT RECOVERY 

PASSIVE BACKGROUND VENTILATION 

POSITIVE INPUT VENTILATION (PIV) 

BRICK REPAIRS 24 

RESIN 

CRACK REPAIRS 

DRIVE FIX WALL TIES 

REMEDIAL WALL TIES 

RYTONS VENTS 30 

WARM AIR VENTS 

BACKGROUND VENTILATION 

PARTS 

DRAINAGE 36 

LAND DRAIN 

FILTER SLEEVE 

ECOGRID 


E&EO. Prices correct at time of publication and are subject to change without notice. Images are for illustration purposes only. 

3

ALL PRICES INCLUDE VAT DAMP PROOFING INJECTION CREAM 

Damp Proofing 

Injection Cream 

Damp Proofing Injection Cream - 400cc Cartridge 

For the treatment of rising damp. 

The DPC injection cream migrates to form a pore liner in damp walls to create a chemical damp proof 

course to stop rising damp. Easy installation for both DIY and General Builders, virtually Odourless and 

non Hazardous. 

Treat walls with damp course cream applied along the base of the wall 150mm from ground level to 

form a continuous DPC barrier. Inject DPC cream directly into 12mm holes pre-drilled in a mortar bed at 

120mm intervals, preferably at perp end joints, for an effective damp course treatment. 

DPC4 - £9.13 

Damp Proofing Injection 4 x 400cc Kit 

16 x DPC4 400cc Cartridges with nozzles, 2 x 12mm x 300mm SDS Drill Bits & DPC Mastic Gun 




DPC4Kit - £34.50 

Damp Proofing Injection Cream Kit - 16 x 400cc 

16 x DPC4 400cc Cartridges with nozzles, 2 x 12mm x 300mm SDS Drill Bits & DPC Mastic Gun 




DPC4Kit - £132.00 

Damp Proofing Injection Cream Box - 25 x 400cc 




DPC4Kit - £231.63 

4 



Damp Proofing 


DPC1 Damp Proofing Injection Cream - 1 litre 

For the treatment of rising damp. 

The DPC injection cream migrates to form a pore liner in damp walls to create a chemical damp proof 

course to stop rising damp. 

A re-plastering specification should be carried out to complete the process. 

DPC1 - £14.70 

NDPC1PD Damp Proofing Injection Cream - 8 x 1 litre 


form a continuous DPC barrier. Inject DPC cream directly into 12mm holes pre-drilled in a mortar bed 

at 120mm intervals, preferably at perp end joints, for an effective damp course treatment. 

NDPC1PD - £108.00 

DPC8 Damp Proofing Injection Cream - 8 Litre Box 

N-Virol DPC Damp Proofing Injection cream formulated to treat rising damp. N-virol have designed an 

economical 8 Litre tub of damp proofing injection cream which can be installed by using a DPC Injection 

pump. 

DPC cream is an effective way to install a chemical damp proof course in your walls to keep them dry and 

to prevent the reoccurrence of rising damp. 

DPC8 - £108.74 

DPC8KIT Damp Proofing Injection Cream 8 Litre Kit 

1 x 8 Litre DPC Box, 1 x Osato Pump with Gel Lance & 1 x 12mm x 300 SDS Drill Bit 

This kit is ideal for damp proofers or plasterers and general builders undertaking a large project. 

Re-sealable cap allows for just some of the cream to be used and then stored for another job at a later 

time. 

DPC8KIT 8 Litre Kit- £136.76 



5 

DAMP PROOFING INJECTION CREAM ALL PRICES INCLUDE VAT

ALL PRICES INCLUDE VAT DAMP PROOFING INJECTION CREAM 

Damp Proofing 


Osatu Tango 7 5ltr Injection Pump 

5Ltr Pump supplied with adapted brass extension nozzle applicator for injecting damp proofing injection 

cream. 

Good value pump with dual functionality as a sprayer as well. 

TANGO7GL - £43.40 

Mesto 5ltr Steel Sprayer with Brass Gel Lance 

This applicator is ideal for Tradesmen and Operatives who carry out regular DPC injection cream work. 

Manufactured in Germany its build quality is robust and durable which means it will stand the rigours of 

daily knocks, bumps and scrapes along with regular usage much longer than the plastic applicators. 

Most Operatives will go through two or three plastic applicators while one Mesto 5 Litre Steel Sprayer 

with a Brass Gel Lance will still be fully functional. 

3560V - £104.68 

DPC Damp Proof Cream Usage Rate: 

Wall Thickness 

4.5” 9” 13.5” 18” 

115mm 230mm 343mm 430mm 

Drilling Depth 100mm 200mm 300mm 390mm 

Drilling Diameter 12mm 12mm 12mm 12mm 

400mm Cartridge 4m 2m 1.3m 1m 

1Ltr Cartridge 10m 5m 3.3m 2.5m 

8Ltr Box 80m 40m 26.6m 20m 

6 



Damp Proofing 

Damp Proof Paint 

N-Virol Damp Proof Paint SuperSeal Plus 

Colour Options - Black & White 

N-Virol SuperSeal Plus is a highly advanced styrene butadiene latex based, liquid applied membrane. Water 

based compound that can be applied to damp backgrounds such as basements and cellars, damp floor 

slabs, etc. 

SSB5 - 5ltrs Black - £32.34 SSB1 - 10ltrs Black - £59.94 

SSW5 - 5ltrs White - £32.34 SSW1 - 10ltrs White - £59.94 

Bond It Rubber Bitumen Emulsion Paint 

Colour - Black 

Bond It Rubber Bitumen Emulsion Paint is a cold applied damp proof and waterproof liquid membrane for 

walls and floors. Bond It Rubber Bitumen Emulsion Paint dries to form a flexible coating which is odour 

free. It is recommended to apply a primer using Bond It Bitumen Primer 

BIBDB009 - 5ltrs - £22.85 

Bitubond Bitumen Primer 


A primer coat of this bitumen based product is suitable on highly porous surfaces before the application of a 

bitumen based damp proof paint. Suitable for concrete roofs and floors, cementitious screeds/renders, 

bitumen felt, weathered bitumen, mastic asphalt, weathered corrugated iron and steel. 

BIBDB020 - 5ltrs - £19.58 

Solseal FLM Flexible Liquid Membrane 


Solseal FLM Flexible Liquid Membrane is a high grade Polyurethane, multi purpose membrane. It is a rapid 

curing liquid applied coating which cures by reaction with atmospheric moisture to produce a flexible and 

elastomeric membrane which is defect free with excellent adhesion to a variety of substrates. Being liquid 

applied, the material allows a completely seamless application over an entire area, even if the structure is 

complex and undulating. 

SOLFLM - 25ltrs - £222.60 

DAMP PROOFING INJECTION CREAM ALL PRICES INCLUDE VAT 



7

ALL PRICES INCLUDE VAT DAMP PROOFING ADMIXTURES 

Damp Proofing 

Admixtures 

Bond It SBR Additive 

A premium grade SBR designed to give concrete floors and cement renders abrasion, chemical and 

water resistance. Bond It SBR also shows improved performance as a key coat adhesive compared to 

non SBR bonding agents. 

BIBDH040 - 5ltrs - £16.44 

N-Virol Waterproofer Render Additive 

All purpose, high grade admixture for use with sand and cement render after the insertion of a 

chemical damp proof course. Integral waterproofer additive may be used in any situation where it is 

necessary to construct cement based sections resistant to external water pressure or to contain 

moisture in a wall or enclosure. 

IWP5LT - £9.60 

Bond-It Power Mix Mortar Plasticiser Concentrate 

High quality, concentrate plasticiser which acts as a replacement for lime and reduces the volume of 

water in the mix which reduces cracking. The doser provides the perfect dosage each time. Ideal for 

pointing and render mixes. Just 500ml is sufficient for 125 x 25kg bags of cement. 

BIBOWM1 - 1ltr - £4.76 

Bond-It Power Proof Water Proofer Admix Concentrate 

Integral water proofer admix concentrate providing resistance to water ingress. Doser provides exact 

dosage. Suitable for mortars and renders to walls, retaining walls, render, swimming pools, roof 

screeds, etc. Improves workability. 

Excellent coverage of 50ml for every 25kg of cement. 

BIBOWP1 - 1ltr - £7.44 

8 



Water Proofing 

Bond It Plug It 5kg 

Tanking 

Rapid hardener cementitious plug compound which forms a water plug in concrete and masonry to plug 

leaks and seepages in cellars, tunnels and shafts. 

Plug leaks and points of water ingress before applying cementitious tanking slurry. Sets in 2 minutes. 

Based on one person applying Plug It place sufficient powder into a container and add 20% volume of 

clean water, (1 part water to 4 parts powder) and mix by hand to form an even colour golf ball size 

‘plug’. 

BIBDH106 5kg - £14.52 

Bond It Tanking Slurry 20kg 

Colour - Grey 

Cementitious tanking slurry suitable for waterproofing basements, cellars, soil retaining walls, tunnels, 

and other walls and floors suffering from or at the risk of potential ground or rain water penetrating. It 

can also be used as a liner for swimming pool construction, pond liners and bunds. 

KA Tanking Slurry is approved by the Local Authority Building Control – Registration number: 

RD4202125” 

Applying KA Tanking Slurry 

BDH107 20kg - £30.00 

KA Tanking Fillet Seal 25kg 

Surface KA Tanking Fillet Seal is a cementitious based rapid curing setting powder used to reinforce 

construction joints below ground or soil retaining construction joints at ground level before applying KA 

tanking slurry. 

Chased into the wall/floor junction or trowled over to form a fillet and form a waterproof barrier at this 

weak construction joint. 

Used as part of a waterproof tanking system. 

KAFILLET 25kg - £42.00 

KA Fillet Detail 

WATERPROOFING TANKING ALL PRICES INCLUDE VAT 



9

ALL PRICES INCLUDE VAT WATER PROOFING MEMBRANES 


Membranes 

Cavity Mesh Membrane 3mm Stud 

Multi functional membrane with strong mesh welded to the face of a high quality high density 

polyethylene membrane used in re-plastering over a new chemical damp proof course, isolating soil 

retaining walls, basement and cellar waterproofing and insulating cold walls. 

NVM31X10 - 1m x 10m (10m 2 ) - £75.00 

NVM31X20 - 1m x 20m - (20m 2 ) £138.46 

NVM32X20 - 2m x 20m - (40m 2 ) £238.14 

Eco Mesh Membrane 2.5mm Stud 

This Damp Proofing Mesh Membrane 20m2 is a versatile physical barrier membrane with a fine mesh 

welded to the face. Suitable for damp proofing above ground after the installation of a new chemical 

DPC, tanking to cellar vaults, walls and floors. This membrane is very flexible allowing for it to be folded 

tightly around internal and external corners. The mesh provides a key for render finishes and dab 

adhesive for a dot and dabbed plasterboard finish. 

KMESHECO1X20 - 1m x 20m (20m 2 ) - £114.00 

KMESHECO2X20 - 2m x 20m (40m 2 ) - £222.00 

Cavity Mesh Membrane 8mm Stud 

Cavity Mesh Membrane 8mm Stud is a high quality damp proofing and basement waterproofing and 

tanking membrane with the added benefit of mesh welded to the surface for direct rendering or dot 

and dab finishing. Made from high density polyethylene. 

NV8MESH2X10 - 2m x 10m (20m 2 ) - £132.00 

NV8MESH2X20 - 2m x 20m (40m 2 ) - £256.00 

Cavity Drain Clear Tanking Membrane 8mm Stud 

Hydrophilic This is a high quality strong durable HDPE cavity drain membrane with a stud profile of 

8mm. The 8mm stud height minimises problems caused by raised floor levels. The membrane is highly 

versatile and can also be used in conjunction with thermal insulation, sound insulation and most types 

of under floor heating. 

NVM82X20 - 2m x 20m (40m 2 ) - £155.40 

10 




Membranes 

20mm Cavity Drain Membrane Floor Membrane 

Suitable for waterproofing floors in basement conversions and new build projects. Roll size: 2mtrs x 20mtrs 

with flat flange. This is a high quality, strong and durable HDPE cavity drain membrane with a stud profile of 

20mm. 20mm stud cavity drain membrane is primarily designed for use as a floor membrane. This floor 

membrane is manufactured with a large 20mm stud profile, giving it a drainage flow rate of 14 litres for 

each square metre of membrane. 

NVM202X20 - 2m x 20m (40m 2 ) - £290.40 

Newton 601 Slimline Floor Membrane 

Newton 601 Slimline Floor Membrane is a high-grade physical barrier flooring membrane used primarily 

for isolating moisture sensitive flooring such as laminate from dampness in the floor slab. 

M6 - 2m x 20m (40m 2 ) - £192.00 

Solsheet SAM Self Adhesive Membrane 

SOLSHEET SAM Self Adhesive Membrane is a 1.5mm thick preformed waterproofing system. The bitumen 

compound is laminated onto an impervious, non-perforated, cross laminated HDPE film. The membrane is 

protected on the self adhesive side with a silicone coated release film. 

SAM - 1m x 20m (20m 2 ) - £150.00 

Bond It Bitubond 100 Tanking Membrane 

Bond It Bitubond 100 Tanking Membrane is a self bonding polymer modified bitumen, covered on one 

side by a durable, high density 2-ply, cross laminated polythene film. 

The underside is protected by a release sheet which is removed prior to the bonding of the material 

on a suitably primed substrate. Once the release sheet has been removed the membrane can be easily 

applied by roller. 

BDB100 - 1m x 15m (15m 2 ) - £135.00 

WATER PROOFING MEMBRANES ALL PRICES INCLUDE VAT 



11

ALL PRICES INCLUDE VAT WATER PROOFING TAPES 


Paints 

N-Virol Superseal Plus Damp Proof Paint 

Colours - Black & White 

N-Virol SuperSeal Plus is a highly advanced styrene butadiene latex based, liquid applied membrane. Water 

based compounds that can be applied even to damp backgrounds. 

SS5 - £32.34 

SS10 - £59.94 

Solseal Bitumen Primer 


Solco Bitumen Primer is a liquid applied, low viscosity bitumen solution used to prime and seal porous 

substrates and promotes the adhesion of bituminous waterproofing systems prior to application of self 

adhesive membranes and other bitumen coatings. 

BITPRIM 10Ltrs - £37.58 

Solseal Rubberised Bitumen Emulsion 


Solseal Rubberised Bitumen Emulsion is a solvent free rubber-asphaltic emulsion used to form a waterproof 

elastic film. Good bond to many substrates, strengthens porous surfaces 

BITEMUL 10 Ltrs- £42.64 

Solseal FLM Flexible Liquid Membrane 


Solseal FLM Flexible Liquid Membrane is a high grade rapid curing Polyurethane liquid applied coating 

which cures by reaction with atmospheric moisture to produce a flexible and elastomeric membrane which 

is defect free with excellent adhesion to a variety of substrates. Being liquid applied, the material allows a 

completely seamless application over an entire area, even if the structure is complex and undulating. 

SOLFLM 25Ltrs - £229.60 

12 




Fixing Plugs 

DryFix Plaster Plug Fixings 

8mm x 70mm 

Used to secure damp proofing cavity membrane to walls. Ideal for use with mesh bonded cavity membranes 

which are to be rendered or dot and dabbed. 

PPLUG70100 - Quantity 100 - £12.00 



DryFix Neoprene Plug Seals 

A neoprene rubber washer which fits onto 8mm and 10mm diameter fixing plugs to provide a seal around 

the head of the fixing plug when tapped into the wall in front of a tanking membrane. 

NVMPSEAL100 - Quantity 100 - £10.50 

DryFix Brick Plug Fixings 

10mm x 60mm 

DryFix Brick Plug Fixing plugs used to install cavity drain membrane to walls. With a preformed hole they 

accept 2″ size 10 screws and wall ties to batten out or build a wall in front of the membrane. If used below 

ground they should be sealed using Plug seals or Butyl rope One roll of butyl rope will seal 100 plug fixings. 

NVMBP100 - Quantity 100 - £25.20 

Wykamol Brick Plug Fixings 

10mm x 60mm 

Fixing plugs with neoprene rubber seals used to install cavity drain membrane to walls. With a preformed 

hole they accept size 10 screws and wall ties to batten out or build a wall in front of the membrane. 

CMSUPERSEAL100 - Quantity 100 - £39.00 

CMSUPERSEAL200 - Quantity 200 - £74.40 

WATER PROOFING FIXING PLUGS ALL PRICES INCLUDE VAT 



13

ALL PRICES INCLUDE VAT WATER PROOFING TAPES 


Tapes 

DryFix Butyl Rope 

10mm x 4.75 meters 

DryFix Butyl Rope is a multi purpose tape used in waterproofing and damp proofing detailing. To provide a 

waterproof and damp proof seal for plug fixings used to secure cavity drain and tanking membranes to 

walls. Can also be used to seal membranes around window and door reveals, to seal around pipe 

protrusions and to seal between membrane overlaps. 

ROPE - £7.80 

DryFix Double Sided Cavity Membrane Sealing Tape 

22.5mtrs x 30mm 

DryFix Double Sided Cavity Membrane Sealing Tape 22.5mtrs x 28mm is used for overlap joints with cavity 

drain membrane installation, for repairs and seals at for example at corners, reveals, wall/floor joints or 

service pipe protrusions through the membrane. 

DFTAPE - £23.28 

DryFix Corner Detail Tape 

150mm x 20mtrs 

DryFix Corner Tape is a high quality single sided butyl tape which is used for over-taping membrane joints at 

wall/floor junctions, for repairs or where membranes have been cut to enable them to overlap, for example 

at corners, reveals or protrusions through the membrane. 

DFCORNERTAPE - £51.00 

DryFix Fleece Tape 

115mm 

Used for butt joints between cavity mesh damp proof membrane sheets. With geotextile backing. Suitable 

to render and dot and dab over. Also ideal for window and door reveals. 

DFFLEECE25 - 115mm x 25m - £46.80 

DFFLEECE10 - 115mm x 10m - £20.40 

DFFLEECE5 - 115mm x 5m - £10.74 

14 




Drainage 

Aqua Channel Drainage Channel 

Basement drainage detail for the wall/floor junction. Collects ground water ingress and feeds it into a 

sump/pump chamber or if an open elevation is available by gravity feed to the outside. 

Drainage Channel is used to relieve hydrostatic water pressure in a basement and is installed behind a 

cavity membrane system. 

AQCHAN 2 meter length - £20.16 

Aqua Channel Drainage Outlet 

Section of Aqua Channel with a 90 degree elbow 32mm drainage outlet positioned at the bottom of the 

channel. The elbow can receive 32mm pipe connected up to a sump chamber. 

This allows ground water ingress collected by the Aqua Channel perimeter drain to drain out into a sump 

chamber to be pumped away. 

DRAINOUT90 - £25.02 

Aqua Channel Inspection Port 

A section of Aqua Channel with a neck extension from the top of the channel which has a removable cap 

fitting. This provides a jetting point to carry out periodic flushing of the Aqua Channel drainage system. By 

installing inspection ports, other wise called Jetting Eyes, complies with the British Standard BS8102: 2009 

for a maintainable Type C cavity membrane installation. 

AQDRAINIP - £21.54 

Basement Sump System with Single Pump & Alarm 

With single submersible pump, high level alarm, internal pipe work and access lid. 

Sump system for use in a basement installation of cavity drain membrane with drainage detail. Ground 

water is collected in the sump chamber and pumped out to an external point. 

BSKSP - £468.00 

WATER PROOFING DRAINAGE ALL PRICES INCLUDE VAT 



15

ALL PRICES INCLUDE VAT WATER PROOFING CONSTRUCTION JOINTS 


Construction Joints 

Solcast Waterstop 20mm 

Solcast Waterstop is a hydrophilic Thermoplastic Elastomer waterproofing strip made from a combination 

of an elastomer and a hydrophilic resin. 

When confined between a construction joint, and in the presence of water it will swell to over four times 

its original volume and build up pressure inside the joint to seal against 

water leaks. 

SOLCASTWATER 20mm x 5mm x 15mtrs- £55.30 

SOLCASTWATER 20mm x 10mm x 7.5mtrs- £76.88 

Solcast Hydrophilic Waterstop Bar 

Hydrophilic Waterstop is a green flexible hydrophilic strip made of high quality butyl rubber and 

Sodium Bentonite. 

Solco Hydrophilic Waterstop is used for preventative sealing of working joints in overgound and 

underground structures to prevent ingress of pressurised water. 

SOLCASTHYDRO - £38.00 

Premcrete Hydrostop BR Waterstop Bar 

Hydrophilic Bentonite waterstop bar for insertion between poured and precast concrete joints which 

swells on contact with water to prevent the passage of water ingress. Can also be used for service pipe 

protrusions, steel to concrete joints and old to new concrete joints. 

Swells to three times its size. 

BR 25mm x 20mm x 5mtrs - £46.33 

Premcrete WS10 Waterstop Bar 

Hydrophilic waterstop bar for insertion between poured and precast concrete joints which swells on 

contact with water to prevent the passage of water ingress. Can also be used for service pipe 

protrusions, steel to concrete joints and old to new concrete joints. 

Swells to three times its size. 

WS10 5mm x 20mm x 15mtrs - £84.46 

16 




Construction Joints 

Leakmaster LV-1 Waterstop Sealant 310ml 

Colour - Grey 

Leakmaster LV-1 is a one component polyurethane water-swelling sealant with excellent and unique 

physical properties. 

It can be applied to places such as joints in civil engineering construction and water services for seals where 

conventional solid sealants cannot be applied easily. Use to seal Waterstop Bar in place. 

LV-1 - £17.80 

Premcrete Hydroseal WSM Waterstop Bar Swellable Sealant 

Colour - Grey 

Gun grade hydrophilic sealant 600ml sachet. Swellable adhesive sealant for use with bonding waterstop 

bar to concrete. Swells by 200%. 

Apply using a barrel gun 600ml sausage applicator. 

Coverage rate: 1 x 600ml sachet gunned to a 5mm bead will bond up to 8mtrs. 

WSM 600ml - £22.80 

Everbuild Tecnic Foil Sausage Barrel Gun 600ml 

External Colour - White, Buff Sand & Terracotta 

Combi barrel gun designed for use with foil sausages. Supplied with nozzle and push disc. 

Can also be used with standard cartridges. 

SGCOMB16 - £21.80 

WATER PROOFING CONSTRUCTION JOINTS ALL PRICES INCLUDE VAT 



17

ALL PRICES INCLUDE VAT WATER PROOFING ROOFING 


Roofing 

Bond It Sealacryl Acrylic Waterproofing Compound 

Colours - Grey & Black 

Bond It Sealacryl acrylic waterproofing compound is a roof coating liquid membrane providing waterproof 

protection for pitched roofs, flat roofs, guttering, corrugated roofing, flashing, roof lights, lead, 

greenhouses, asphalt and metal. It bridges cracks and gaps. Solvent based with fibre reinforcement. 

Unaffected by solar or temperature conditions. Can be applied onto damp surfaces. Remains flexible. 

BISA5 5kg - £36.00 

BISA20 20Kg - £115.20 

Bond It Bitubond Bitumen Primer 


Bond It Bitubond Bitumen Primer 5Ltrs provides a primer coat to highly porous surfaces before the 

application of a bitumen based paint. 

Suitable for concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, 

mastic asphalt, weathered corrugated iron and steel. 

BIBDB020 5ltrs - £19.58 

Bond It Bitubond Bitumen Paint 


Bond It BITUMEN PAINT is used for the protection of ferrous and non-ferrous metals, concrete, roofing felt, 

fibre/cement, corrugated iron, asphalt and wood, against water. Reduces corrosion and decay. 

BIBDB017 - £17.62 

HyperCoat SB Polyurethane Liquid Membrane 

Colour - Grey 

Polyurethane liquid membrane for waterproofing & protection. HyperCoat SB is a one component 

polyurethane fluid which cures with the humidity in the atmosphere. 

It sis based on a pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result 

in excellent mechanical, chemical, thermal, UV and natural element resistance properties. 

HYPERCOAT SB - £223.33 

18 



Surface 

Coatings 

DryFix Masonry Water Repellent Masonry Cream 

Best value masonry sealer cream on the market! 

DryFix Masonry Water Repellent Cream is available in both 5 litre and 10 litre tubs. A high quality cream 

using the latest silicone technology with a high concentration of active ingredient. DryFix Water 

Repellent Masonry Cream can be applied by brush, roller or low pressure airless sprayer. Due to its 

creamy consistency application onto walls and overhangs is easily achievable. 

9DRY5 - 5 Litres - £102.00 

9DRY10 - 10 Litres - £174.00 

Nvirol Waterseal Masonry Water Repellent Brick Sealer 

If your property has external walls that are exposed to the elements, particularly south west facing, it is 

important to keep the facing brick and pointing in good condition to prevent the passage of rainwater 

migrating across cavity insulation infill or solid wall construction through to the internal, decorated 

finish. Coverage: 1 litre will cover 8m2 (subject to the porosity of the surface and application method.) 

WAT5 - 5 Litres - £22.67 

WAT25 - 25 Litres - £79.80 

Nvirol Salt Neutraliser 

An aqueous solution based on acetic acid with a surfactant, has been specifically developed to overcome 

the problem of salts in a wide range of substrates from new plasterwork to old stone. 

Coverage will vary with the type of surface and substrate: 1 litre concentrate should treat 5 to 10m2. 

SALT1 - 1 Litre - £9.54 

Nvirol Algae & Moss Killer Concentrate 

Algae and Moss Killer Concentrate 1 Ltr is a high performance exterior/interior use concentrated 

professional algae and moss killer. It is highly soluble in water and contains no acids or bleaches which 

could damage surfaces on which they are applied. It is an ideal maintenance product for schools, local 

authorities and commercial premises. It has also been approved by the Health & Safety Executive as 

both a wood preservative and surface biocide. 

9MOSS1 - 1 litre - £8.34 

9MOSS5 - 5 Litres - £25.20 

SURFACE COATINGS ALL PRICES INCLUDE VAT 



19

ALL PRICES INCLUDE VAT SURFACE COATINGS 

Surface 

Coatings 

Bond It Mould Stop – Suitable for Algae Removal 

A premium grade, powerful cleaning agent formulated to remove mould, mildew algae, and lichen, etc. 

Removes and eradicates organic growth. Suitable for use on wood, concrete, plastic, stone and tarmac 

Easy to use – just apply and leave to dry Ideal for use at home, in the garden, for caravans and boats, public 

walk areas, in farm yards, kennels and stables. Previously branded as Moss Stop 

BDH073 - 2.5 Litres - £3.06 

BDH070 - 5 Litres - £5.38 

Nvirol Dry Rot Masonry Biocide Treatment 

A high strength fungicidal microemulsion concentrate, dilutable with water for the treatment and control 

of dry rot and fungal growth in masonry. Micro emulsion concentrates are designed for high penetration 

into the substrate for a deeper, longer lasting treatment. Masonry Biocide is designed for either spray 

application or injection into the masonry. 1 litre provides a 25 litre solution. 

For professional use only. HSE number: 8476 

BIO - 1 Litre - £13.14 

Bond It Bitubond Bitumen Paint 


Bond It BITUMEN PAINT is used for the protection of ferrous and non-ferrous metals, concrete, roofing felt, 

fibre/cement, corrugated iron, asphalt and wood, against water. Reduces corrosion and decay. 

BIBDB017 - £17.62 

Bond It Sealacryl Acrylic Waterproofing Compound 

Colours - Grey & Black 

Bond It Sealacryl acrylic waterproofing compound is a roof coating liquid membrane providing 

waterproof protection for pitched roofs, flat roofs, guttering, corrugated roofing, flashing, roof lights, 

lead, greenhouses, asphalt and metal. It bridges cracks and gaps. Solvent based with fibre 

reinforcement. Unaffected by solar or temperature conditions. Can be applied onto damp surfaces. 

Remains flexible. 

BISA5 5kg - £36.00 

BISA20 20Kg - £115.20 

20 



Mould 

& Condensation 

N-Virol Anti Mould Paint Additive 100ml 

Added to standard emulsion and oil based paints, wall paper paste, tile grout and PVA to prevent 

regrowth of black mould. 100ml is sufficient for a 5ltr pot of paint. 

We advise a sterilisation of the area to be painted first with a biocide steriliser and improvement to 

ventilation. 

MCPA100 - 100ml - £7.19 

NAMA100X12 - Box of 12 - £77.63 

ACS Mould Wash Concentrate 

If your Concentrated Fungicidal cleaner and surface Biocide suitable for both Professional and DIY use. 

HSE No 7676. Ideal to treat and sterilise areas affected with black mould growth before re-decorating. 

1 x 250ml bottle will make 5 litres of solution mixed with water or part mixed in a ratio of 1 part 

concentrate to 19 parts water 

ACSMWC250 - 250ml - £7.14 

ACS Anti Mould Emulsion Paint 

Colours: White & Magnolia (Also available in 12 pastel colours) 

An excellent, premium quality, low odour anti mould coating guaranteed to protect against unsightly 

and unhygienic black mould even when there is persistent condensation. The unsurpassed performance 

is achieved by combining modern paint technology with highly advanced, proven biocides. 

The anti-mould biocide is combined throughout the paint film, which is formulated to impart toughness, 

elasticity, water resistance and durability to the finish. 

ACSEMULS2.5 - 2.5 Litres - £32.40 

ACSEMULS5 - 5 Litres - £50.28 

ACS Anti Mould Emulsion Paint Kit 

Ideal for homeowners, landlords, painters and decorators this handy package of concentrated mould 

wash and specialist anti-mould emulsion paint will remove treat walls and ceilings suffering from an 

outbreak of black mould. The kit comprises of 1 x Mould Wash Concentrate 250ml which will make up 

to 5ltrs of solution when mixed with water. You then choose either a 2.5ltr of 5ltr pot of paint. 

ACSKIT2.5 - 2.5 Litres - £46.74 

ACSKIT5 - 5 Litres - £64.62 

MOULD & CONDENSATION ALL PRICES INCLUDE VAT 



21

ALL PRICES INCLUDE VAT MOULD & CONDENSATION 

Mould 


N-virol Suretherm Insulating Anti Condensation Paint 

N-virol Suretherm Insulating Anti Condensation Paint reduces the formation of surface condensation on 

internal walls and ceilings whilst providing an added layer of insulation. The glass bubble technology of the 

paint works to create a thermal barrier which keeps colder wall surfaces and moisture laden warm air 

apart, preventing the formation of water droplets. Consequently, condensation is dramatically reduced. 

APC1 - 2.5 Litres - £42.60 APC2 - 5 Litres - £69.30 

APC3 - 10 Litres - £119.46 APC3 - 25 Litres - £220.80 

Nvirol Dry Rot Masonry Biocide Treatment 

For the treatment and removal of black mould supported by a 5 year performance guarantee certificate 

issued with each order. Black mould growth is a consequence of high levels of internal humidity reaching 

in excess of 70% on a regular occurrence. In the first instance, all measure of reasonable ventilation such 

as correctly selected and positioned extract fans and some means of unhindered background ventilation 

such as window openings, trickle vents or passive vents used or mechanical ventilation installed. 

ACSPACK - £94.19 

Easy Vent Loft Ventilation 

Fresh air ventilation supplied by the Easyvent system will allow your loft to breathe, stabilising the atmosphere 

and providing an exit route for moisture bearing air. 

1 vent per 5m 2 of floor area. 

EVLV1-149 - £3.96 

Home Dry Passive Background Vent 

For Condensation Control 

Bond It Home Dry Passive 9″ x 6″ Air Brick Ventilator Background Vent is fitted with an internal filter 

which promotes the removal of moisture laden air out of a property whilst insulating against draughts 

and noise pollution. The filter also filters out dust particles from incoming air. It is removable allowing 

routine cleaning to ensure long life performance of the filter. The volume of water dissipated in a 24 

hour period through this vent can be as much as 2.5 litres. 

HDRYV1 - 9” x 6” Air Brick - £59.40 

HDRYV2 - 5” Core Drill - £59.40 

22 



Mould 


Vectaire Continual Running Extract Fans 

This extract fan is suitable for retro fitting or new builds but especially for private and social housing 

tenanted properties due to the combination of silent running, only 15 db, so it will not disturb occupants 

in adjacent bedrooms and the running cost of only £1.50 per annum based on a kw unit price of 10p per 

unit which has been tested and verified by the BRE. 

EL1003 - Elegance Axial Fan - £94.80 

ELX1003 - Elix Centrifugal Fan - £138.60 

Kair KHRV150 Single Room Heat Recovery Ventilation Fan 

The Kair KHRV150 single room heat recovery ventilation fan fan can be used in both residential and 

commercial property. It will control the humidity of a single room with a cubic volume of up to 80m3. 

For example, a room area of 5mtrs x 8mtrs with a floor to ceiling height of 2mtrs or variations of these 

dimensions adding up to 80m3 

. 

KHRV150 - £285.60 

Vectaire PPF4 Positive Input Ventilator PIV Fan For Flats 

The Vectaire PPF4 Positive Input Ventilator (PIV) Fan For Flats draws through fresher air directly from 

outside of the property, filters it and tempers it before delivering it through a neat and unobtrusive vent 

grille to provide a regular change of air. 

The PPF4 ventilator is suitable for Flats, Apartments and other properties that do not have a loft space 

to install the loft mounted version. The PPF4 can be installed onto walls, ceilings or in cupboards. 

PPF4 - £275.00 

Vectaire Positive Input Ventilator PIV Fan Whole House 

Ideal The Vectaire PPF9 Positive Input Ventilator (PIV) Fan Whole House draws through fresher air in 

the loft space, filters it and tempers it before delivering it through a neat and unobtrusive ceiling 

diffuser to provide a regular change of air. The ceiling diffuser is positioned in the ceiling of a Landing 

to a house or to the ceiling of a hall in a bungalow. This process, supported by extract fans in the 

Kitchen, Bathroom and Utility room and trickle vents or background vents; provides an excellent, low 

cost solution to condensation issues. 

PPF9 - £261.00 

MOULD & CONDENSATION ALL PRICES INCLUDE VAT 



23

ALL PRICES INCLUDE VAT BRICK REPAIRS 

Brick 

Repairs 

Neoprene Remedial Mechanical Wall Tie 11mm 

Lengths available - 150mm, 200mm & 225mm 

Remedial mechanical replacement wall tie fixings available to buy in smaller quantities or the exact 

number you want. Dimensions: 11mm diameter x 150mm, 200mm & 225mm long. A rapid fixing replacement 

wall tie, simply drill the hole, clean, then insert the tie put the special key in your drill and 

tighten the tie. 

PNE050 - Qty 50 - £68.40 

PNE100 - Qty 100 - £105.60 

PNE200 - Qty 200 - £210.60 

Drive Fix Helical Wall Tie 8mm 

Lengths available - 200mm & 220mm 

Available in 200mm and 220mm lenghts. Other lengths and quantities available on request. Drive Fix 

Helical Wall Tie is installed using a proprietary setting tool that is used with an SDS-Plus shank hammer 

drill to drive and countersink the tie. The helical design allows the tie to be driven quickly and easily 

into a pre-drilled pilot hole. As the tie is driven into the substrate, the fins of the tie undercut the 

masonry to provide an expansion-free anchorage that will withstand tension and compression loads. 

DT8X200 - Qty 100 - £84.00 

DT8X220 - Qty 100 - £95.88 

Helical Bar 6mm 

Cavity Grade 304 stainless steel. Eliminates the need to re-build a brick wall – excellent bonding capabilities. 

Coiled spring properties within elastic limit. High stress material. No sudden or catastrophic failure 

point. Lengths up to 10m – less wastage. Less intrusive than standard repairs. Helical bars should be 

spaced at 450mm centres (or every 4 courses) and should span 500mm each side of the crack. 

CHC061000 - 1 meter length - £5.10 

CHC061000x10 - 10 x 1 meter lengths - £39.60 

CH061000 - 10meter coil - £39.60 

Helical Bar And Polyester Resin Crack Repair Kit 

This crack repair kit comprises of the following: 5 x Helical bars 6mm x 1mtr, 3 x Polyester Resin 

400ml, 3 x Polester resin Mixer Nozzles, 1 x Bond It Anchor Resin Gun 

Helical bars should be spaced at 450mm centres (or every 4 courses) and should span 500mm each 

side of the crack. 

POLYRESCSK - £57.00 

24 



Brick 

Repairs 

Helical Bar Crack Stitch Kit 10 x 1mtrs 

This kit contains all the components needed to allow you to repair vertical or stepped cracks in masonry 

walls. Repairs carried out using this system will stabilise the structure, provide resistance against further 

cracking and restore the structural integrity of the masonry. Components: 10 x 1 metre x 6mm Helical Bars, 

1 x 3Ltr Tub 2 – Part Thixatropic Anchor Grout, 1 x Faithfull Pointing & Grouting Gun Kit & 1 x Finger Trowel 

CSTKIT - £57.00 

Anchor Grout 3kg 

High performance thixatropic two part cementitious grout. Non-shrink, pumpable, thixotropic, high 

performance, cement-based grout suitable for injection with a Grout Gun. 

Supplied in a 3 litre bucket it contains the dry powder and liquid component individually packed to make 

either 3 litres of injectable grout. 

HSGT60T - £44.10 

Surebond Polyester Resin 400ml With Mixer Nozzle 

Embedding crack stitch helical bars – 6 x 400ml cartridges will embed 10 x 1mtr helical bars in a 35mm deep 

slot. Suitable for use in concrete, brickwork and stone, Suitable for fixing wall ties, starter bars, studs & bolts 

Suitable for close edge fixings, Chemically resistant, Waterproof & vibration proof. 

HGRESIN - £9.48 

Crack Sealer Plus 300ml 

Colour options - Brick Red & Grey 

Made by Wykamol this is a 2 part thixatropic epoxy adhesive which fills cracks from 2mm – 12mm in 

brick, concrete, blocks and render. It provides a high strength waterproof bond and fully cures in 12 

hours. Completes crack repairs with helical bars and grout. Can be used to repairs cracks in basements. 

WYCRACK - £46.20 

BRICK REPAIRS ALL PRICES INCLUDE VAT 



25

ALL PRICES INCLUDE VAT EPOXY PRODUCTS 

Epoxy 

Products 

DryFix Epoxy Liquid Floor Paint - Two Part 

Colour Options: Grey, Red & Clear 

N-Virol DryFix Epoxy Liquid Floor Paint, Two Parts, 4.5Ltrs for damp proofing basements and cellars, garage 

floors and industrial floors such as warehouses, garage service centres and other commercial units with 

high footfall and vehicle traffic. This paint is tough and durable enough to accept fork lift trucks. 

DFEPXFLOOR4.5 - 4.5 Litre - £99.59 

DryFix Epoxy Screed - Heavy Duty 

Available in a range of colours. Matching service available. 

DryFix Epoxy Screed is a three part, solvent free epoxy resin, formulated to provide a thin resurfacing 

screed for concrete floors. This non-porous, slip resistant, easy to clean finish is ideal for areas that 

demand a tough hard wearing and decorative surface. 

DFSCREEDHD - 10kg - £54.00 

DFSCREEDHD - 20kg - £96.00 

DryFix Epoxy Bund Paint 

Colour: Black 

Epoxy Bund Paint is a tough, flexible, chemical resistant and waterproof epoxy resin coating for protecting 

concrete and metal bund tanks . Suitable for internal and external surfaces. Chemical storage bund areas, 

balconies, flat roofs, metal stairways, gutters and all other areas requiring waterproofing and high chemical 

spillage resistance. 

BUND - 4kg - £91.29 

DryFix Industrial Floor Paint 

Colour Options: Mid Grey & Tile Red 

A formulated single part polyurethane resin based industrial floor paint. It offers good resistance to oil 

and grease and spillages to a wide range of chemicals used within industry. It provides a hard wearing 

surface for interior applications transforming drab, stained concrete flooring into a highly decorative 

area. Suitable for timber flooring. 

DFIND5 - 5 Litres - £44.49 

DFIND20 - 20 Litres - £145.29 

26 



Epoxy 

Products 

DryFix Epoxy Sealer 

Available in a variety of colours 

Epoxy sealer is a two-part, solvent free, epoxy resin for sealing and impregnating concrete floors that 

demand outstanding performance. A tough, durable, chemical resistant surface that are easy to clean. 

The glazed finish is capable of withstanding heavy fork trucks and intense pedestrian trafficking. 

Standard - 2ltr - £53.09, 4.5ltr - £101.90 

Solvent Based - 2ltr - £49.49, 4.5ltr - £97.49 

Water Based - 2ltr - £47.09, 4.5ltr £92.69 

DryFix Epoxy Mortar 

Various colours available 

Epoxy Mortar is a t tough epoxy resin mortar for repairing damaged dangerous concrete or stone 

floors. An excellent concrete resurfacing material to provide outstanding impact and chemical spillage 

resistance. 

Damaged, dangerous floors - 10kg - £54.29, 25kg - £93.89 

Patching Mortar - 5kg - £49.49, 10kg - £87.89 

DryFix Epoxy Joint Sealant 

Various colours available 

Epoxy joint sealer is a two part epoxy/polyurethane resin joint sealant for sealing expansion/contraction 

floor joints found in concrete, stone, asphalt, timber, resin based flooring and metal surfaces. This 

sealant offers superb resistance against attack by chemicals, oil, greases, petrol, solvents and acids. 

Joint Sealant - 1ltr - £66.29 

Vertical Grade - 2ltrs - £73.48 

DryFix Concrete Cleaners 

Various concrete cleaners which are ideal preparation for new concrete floors prior to sealing, 

painting and resurfacing, or they will quickly and efficiently restore contaminated floors back to their 

original pristine condition. 

Concrete Cleaner 5ltr - £12.90, 25ltr - £55.50 

Concrete Degreaser 5ltr - £24.29, 25ltr - £109.49 

Concrete Etch 5ltr - £11.70, 25ltr £44.69 

EPOXY PRODUCTS ALL PRICES INCLUDE VAT 



27

ALL PRICES INCLUDE VAT TIMBER TREATMENTS 

Timber 

Treatments 

N-Virol Woodworm Killer Concentrate 

N-Virol Woodworm Killer Concentrate 1Ltr is a Microemulsion concentrate which when mixed with 24 

litres of clean water provides 25Ltrs of solution. Prevents and eradicates common furniture beetle and 

other insect attacks in timber. Concentrated insecticide 0.2%w/w Permethrin on dilution. This product is 

approved under The Control of Pesticides Regulations 1986 (as amended) for use as directed. HSE No. 

8570. For use only as described on the label. 

For professional use only. 

WWK - 1 Litre - £13.14 

N-Virol Woodworm Killer Treatment 1 litre Package Deal 

N-Virol N-Virol Woodworm Killer Concentrate 1Ltr is a Microemulsion concentrate which when mixed 

with 24 litres of clean water provides 25Ltrs of solution. 10 x 1 litres. Prevents and eradicates common 

furniture beetle and other insect attacks in timber. For professional use only. Concentrated insecticide 

0.2%w/w Permethrin on dilution. This product is approved under The Control of Pesticides Regulations 

1986 (as amended) for use as directed. HSE No. 8570 


NWK1PD 10 x 1litre - £118.26 

Woodworm Killer Concentrate 6 x 1Ltr and Spray Pump 

N-Virol Woodworm Killer Concentrate 1Ltr is a Microemulsion concentrate which when mixed with 24 

litres of clean water provides 25Ltrs of solution. 6 x 1 litres of concentrate will treat the roof timbers of a 

large 3 bed semi. Prevents and eradicates common furniture beetle and other insect attacks in timber. 

Concentrated insecticide 0.2%w/w Permethrin on dilution. This product is approved under The Control 

of Pesticides Regulations 1986 (as amended) for use as directed. HSE No. 8570 


NWW6KIT - £97.90 

Osatu Tango 7.5Ltr Pressure Sprayer 

Osatu Tango 7.5Ltr pressure sprayer for use in applying woodworm killer, masonry water repellent, dry 

rot fluid, algae killer and other water based chemical treatments. 

Low course with adjustable spray head. 

With handy shoulder strap. 

TANGO7SPRAY - £34.20 

28 



Timber 

Treatments 

ACS Boracol Boron Gel 400cc 

Boracol B40/1 Boron Gel 400cc is a combination of Disodium octaborate tetrahydrate (DOT) and Benzalkonium 

chloride in a special blend of glycols. Boracol B40/1 is a high active ingredient treatment for both insect 

infestation such as woodworm and a preservative against fungal decay such as wet rot and dry rot. Generally 

used in structural timbers in roofs, floors and joinery. 

For professional use only. For use only as a Wood Preservative. 

B40/1 - £23.76 

N-Virol Dual Purpose Woodworm Treatment 

N-Virol Dual Purpose Woodworm treatment is a concentrated microemulsion dual active fungicide/ 

insecticide based on a combination of low toxicity fungicides, Propiconazole and 3-Iodo-2-Propynyl- 

Butyl Carbamate together with the contact insecticide Permethrin. It is designed to prevent and eradicate 

wood rotting fungi and Common Furniture Beetle (Anobium Punctatum) plus any other wood destroying 

insects in building timbers. 


DUAL - £29.82 

N-Virobor 10 Boron Wood Preservative 

N-ViroBor 10 Boron Wood Preservative 5Ltrs is an aqueous wood preservative based on disodium 

octaborate and benzalkonium chloride. Suitable for the eradication of common furniture beetle 

(Anobium punctatum) and other wood boring insects in building timbers and for the prevention of 

fungal decay in sound timbers following the removal of sources of moisture. 


NVBOR20 - £16.20 

N-Virobor 10 Boron Wood Preservative 10Ltr Kit 

Nvirobor 10 Boron Wood Preservative can also be used to prevent slime, mould and algae, insect and 

wood rot attack on teak decks, external decking and wood furniture. Wash surfaces until clean, allow 

to dry until just damp and apply Nvirobor 10 by brush or course sprayer. A second coat can be applied 

where required. This kit comprises: 

2 x 5Ltr Nvirobor 10 – Will treat up to 40m2 

1 x Osatu 5Ltr Pressure Sprayer 


NVBOR10KIT - £60.50 

TIMBER TREATMENTS ALL PRICES INCLUDE VAT 



29

ALL PRICES INCLUDE VAT RYTONS VENTS FOR BACKGROUND VENTILATION 

Rytons Vents for 

Background Ventilation 

AC7HP Controllable LookRyt® Aircore® 


5” dia. Retro-fitted core ventilators for the provision of controllable background air to habitable rooms. 

Including the LookRyt® panel which disperses air evenly for maximum comfort. Paint or wallpaper the 

LookRyt® panel to match room décor for discreet appearance. 

Equivalent Area, AC7HP - 6,700mm 2 . AC7HPCWL 6,500mm 2 

AC7HP Baffled & Controllable - £19.58 

AC7HPCWL Baffled & Controllable with Cowl - £27.34 

AC10HP Controllable LookRyt® Aircore® 


5” dia. Retro-fitted core ventilators for the provision of controllable background air to habitable rooms. 

Including the LookRyt® panel which disperses air evenly for maximum comfort. Paint or wallpaper the 

LookRyt® panel to match room décor for discreet appearance. 


AC10HP Controllable - £17.27 

AC10HPCWL Controllable with Cowl - £24.60 

TC8H&M 9”x3” Ventilation Set with Hit & Miss 


9” x 3” Telescopic cavity liner set for background room ventilation. Telescopic cavity liner contains an 

internal baffle to reduce light and draughts. Internal hit & miss grille manually adjusted with an easy 

sliding action giving control over the amount of ventilation let into the room. 

Equivalent Area, TC8H&M - 10,200mm 2 . TC8H&MCWL ,10,000mm 2 

TC8H&M Baffled & Controllable - £19.58 

TC8H&MCWL Baffled & Controllable with Cowl - £27.34 

TC18H&M 9”x6” Ventilation Set with Hit & Miss 


9” x 6” Telescopic cavity liner set for background room ventilation. Telescopic cavity liner contains an 

internal baffle to reduce light and draughts. Internal hit & miss grille manually adjusted with an easy 



TC18H&M Baffled & Controllable - £19.58 

TC18H&MCWL baffled & Controllable with Cowl - £27.34 

30 



Rytons Vents for 

Warm Air Appliances 

ACLP Mini LookRyt® Aircore® 


3” Dia. Retro-fitted core ventilators for the provision of combustion air to low kilowatt stoves and fires. 

Mini internal LookRyt® panel size barely bigger than a light switch for a discreet appearance in the room. 

Paint or wallpaper the LookRyt® panel room décor for a discreet appearance. HETAS approved for use with 

solid fuel appliances. 

Equivalent area - 3,168mm 2 

AC3LP - £39.88 

AC7LP Baffled LookRyt® Aircore® 


5” dia. Retro-fitted core ventilators for the provision of combustion air to boilers, stoves and fires. All sets 

include a draught reducing LookRyt® panel which disperses air evenly for maximum comfort. Paint or 

wallpaper the LookRyt® panel to match room décor for discreet appearance. HETAS approved . 


AC7LP Baffled - £16.85 

AC7LPCWL Baffled with Cowl - £23.98 

AC10LP LookRyt® Aircore® 





Equivalent Area, AC10LP - 10,400mm 2 . AC10LPCWL 11,100mm 2 

AC10LP - £15.90 

AC10LPCWL with Cowl - £23.78 

TCL8 9”x3” Ventilation Set with Flush Louvre 


9” x 6” Telescopic cavity liner set for ventilating boilers, stoves and fires. Telescopic cavity liner contains 

an internal baffle to reduce light and draughts. Finished with a fixed open flush fitting louvre ventilator 

internally. HETAS approved for use with solid fuel appliances. 

Equivalent Area, TCL8 - 9,400mm 2 . TCL8CWL ,9,100mm 2 

TCL8 - £13.86 

TCL8CWL with Cowl - £19.64 

RYTONS VENTS FOR WARM AIR APPLIANCES ALL PRICES INCLUDE VAT 



31

ALL PRICES INCLUDE VAT RYTONS SUPER ACOUSTIC VENTS AND PARTS 

Rytons , Super Acoustic Vents 

& Parts 

AAC125LP Super Acoustic LookRyt® Aircore® 


5” dia. Retro-fitted combustion air vent for boilers, stoves and fires. Super acoustic lining reduces sound 

by 44 dB Dn,e,w for a more peaceful environment. Unique draught reducing internal panel disperses air 

evenly into the room for improved comfort. Paint or wallpaper the internal panel to match room décor 

for a discreet appearance. Equivalent Area, AAC125LP - 7,400mm 2 , AAC125LPCWL - 7,200mm 2 

AAC125LP Super Acoustic - £89.24 

AAC125LPCWL Super Acoustic with Cowl - £93.43 

AAC125HP Super Acoustic Controllable LookRyt® Aircore® 


5” dia. Retro-fitted core ventilator for background room ventilation. Super acoustic lining reduces 

sound by 43 dB with internal panel fully open and 50 dB when closed (Dn,e,w). Unique draught 

reducing internal panel disperses air evenly into the room for improved comfort. Paint or wallpaper the 

internal panel to match room décor for a discreet appearance. 

Equivalent Area, AAC125HP - 8,500mm 2 , AAC125HPCWL - 8,400mm 2 

AAC125HP Super Acoustic Controllable - £86.08 

AAC125HPCWL Super Acoustic Controllable Cowl - £90.83 

DamRyt® Air Brick Protector (9×3 Cover & Frame Set) 

Surface mounted cover and frame set to protect any 9″ x 3″ air brick, grille and grating from flooding. 

Permanently fixed frame with a snap on cover that can be fitted in seconds. Hidden seal inside the cover 

helps prevent water seepage. Red cover attracts attention and acts as a reminder to remove it when 

flood water has receded. Frame easily installed by an experienced DIYer. 

Rytons DamRyt® Air Brick Protector - £16.56 

Aircore® Tubes 



AC7Tube 125mm Baffled Tube - £6.24 

AC10Tube 125mm Non Baffled Tube - £5.78 

AC3Tube 73mm Non Baffled Tube - £11.54 

ACConect 125mm Tube Connector - £1.01 

32 



Rytons 

Parts 

Rytons Wind Blast Cowl 


Equivalent area - 3,168mm 2 

ABC3 9” x 3” Cowl - £5.11 

ABC6 9” x 6” Cowl - £6.07 

ABC9 9” x 9” Cowl - 7.08 

Push & Lock Soffit Vent 

Colour - White, Brown & Black 





PL235 Push & Lock Soffit Vent - £0.67 

Multifix Air Brick 

Colour - Terracotta 

Rytons Multifix® Air Brick is an interlocking air brick. Can create 9” x 3”, 9″ x 6″ and 9″ x 9″ air brick openings. 

For use with Rytons Periscope® Underfloor Ventilator. 

Consider using a cowl in exposed areas. 

MFAB - £2.06 

Periscope® Underfloor Ventilator 


9” x 6” Telescopic cavity liner set for ventilating boilers, stoves and fires. Telescopic cavity liner contains 

an internal baffle to reduce light and draughts. Finished with a fixed open flush fitting louvre ventilator 

internally. HETAS approved for use with solid fuel appliances. 

Equivalent Area, TCL8 - 9,400mm 2 . TCL8CWL ,9,100mm 2 

PURF Periscope® Underfloor Ventilator - £7.37 

RYTONS PARTS ALL PRICES INCLUDE VAT 



33

ALL PRICES INCLUDE VAT BUILDNG MATERIALS 

Building 

Materials 

Bond It Mega Stik 750ml 

Bond It Mega Stik is an ideal adhesive for securing plasterboard to walls, metal and timber stud walls 

and battens. No need to handle heavy bags of dab adhesive, quick and easy to apply with a foam gun. 

Can be skimming the plasterboard within an hour of fixing. 

BDEFMS 750ml - £6.89 

Bond It Mega Stik Kit 

Bond It Mega Bond It Mega Stick Plasterboard Adhesive 8 Can Kit includes: 

8 x Bond It Mega Stick 750ml adhesive foam (sufficient to fix up to 40 standard size plaster boards) 

1 x Bond It Expanding Foam Gun Cleaner 500ml 

1 x Bond It Heavy Duty Teflon Coated PU Expanding Foam Gun Applicator BDAK45 

Bond It Mega Stick is a fast curing adhesive foam for the rapid installation of plasterboard, insulation 

boards, floorboards and roof decking. 

BDEFMS8 - £76.94 

Bond It Professional Gun Foam Applicator 

A professional gun for delivering polyurethane foam. Made entirely of metal, it is robust and easy to 

handle with its ergonomic handgrip made of anti-solvent nylon. Body, adaptor, non-returnable valve 

and nozzle are teflon coated to prevent foam from sticking to the gun and facilitate cleaning. 

Exceptionally hard wearing gun parts – this is a gun for life!! 

BDAG1 - £15.20 

Bond It Expanding Foam Gun Cleaner 

A dual purpose, solvent-based solution for effective cleaning of expanding foam applicator guns and 

removal of wet/ uncured foam. Regular cleaning is essential in order to prolong the service life of the 

applicator and optimise foam delivery. 

Attaches to standard foam applicator guns 

BDCF1 - £4.37 

34 



Building 

Materials 

Bond It Tanking Kit 

Bond It Tanking Slurry Kit for damp proofing above ground and waterproofing below ground. Complete 

with Plug It water stop compound to plug leaks and Bond It high grade SBR for priming surfaces and creating 

sand and cement fillets. This handy kit has everything you need to complete a tanking render finish in 

one coat to an area of 12m2 or in two coats to an area of 6m2. The kit comprises of: 

1 x Bond It Tanking Slurry 20kg 

1 x Bond It SBR 5Ltrs 

1 x Bond It Plug It 5kg 

1 x Masonry Tanking Brush Applicator 

TANK-KIT - £48.00 

Bond It Resiprime DPM 

Colour - Straw 

Resiprime DPM is suitable for sealing and priming absorbent and non absorbent sub floors, making good 

weak concrete floors and screeds and going over old adhesive residues before applying a new parquet 

floor adhesive. Bond It Resiprime DPM is also suitable as a damp-proof membrane over underfloor 

heating systems and on sub-floors not subject to hydrostatic pressure. 

BDRESI5 5ltrs - £69.40 

Bond It Render Mesh 160gsm 50m2 

160gsm – 4mm x 4mm – Pink 

Anti crack alkali resistant glass fibre woven mesh for reinforcing concrete, render and screeds. Can also be 

used with external insulation systems. Improves strength when embedded into wet base coats. 

High quality and tear resistant. 

BDRENM - £39.95 

Bond It SBR Admixture 

Bond It SBR is a waterproofing chemical admixture which improves water and chemical resistance in 

screeds and mortars. 

The solids content is 38% making this a high grade, high quality SBR. SBR can be used as a primer or 

bonding agent for tiling and tanking. 

BDH04 - 2.5ltrs - £7.80 

BDH040 - 5ltrs - £16.44 

BDH041 - 25Ltrs - £66.00 

BUILDING MATERIALS ALL PRICES INCLUDE VAT 



35

ALL PRICES INCLUDE VAT PERFORATED LAND DRAIN COIL & FILTER SLEEVE 

Perforated Land Drain Coil 

& Land Drain Filter Sleeve 

Perforated Land Drain Coil 


Single wall perforated drain used to collect surface and ground water from gardens, highways, golf 

courses, fields and basement construction. 

PLD60x25 60mm x 25m Perforated Land Drain - £31.60 






Land Drain Filter Sleeve 

Colour - White 

Perforated land drain filter sleeve prevents the unwanted sand and silt particles from entering and 

clogging perforated drainage pipes. 

It is recommended for the protection of all underground drainage systems in all soil types. It is 

particularly suited for use in sandy and silty soil conditions. 

The durable knit construction is seamless and can be used as a filter envelope to cover various types of 

perforated drainage materials including straight wall and corrugated HDPE, steel, aluminium and PVC 

pipes. It is a low cost and time saving alternative to backfilling with expensive, heavy, and sometimes 

hard to find granular backfill materials. 

FLR60/25 60mm x 25m Filter Sleeve - £22.50 









Other sizes available - please phone 01329 235252 for more details 

36 



Ecogrid 

Permeable Paving 

Ecogrid Permeable Paving 

Ecogrid permeable paving by the square metre which is made up of 9 grids 330mm x 330mm x 30mm high for 

E30 grids and 40mm high for EH40 grids. 

This permeable paving grid is made of 100% recycled plastic. Ideal for garden shed foundations and other 

garden structures such as a Pagoda, Office and even a small pavilion. 

The grid can be filled with pea gravel, soil which can be seeded to grow grass, chippings or rubber crumb. 

E30 is ideal for garden shed foundations and other garden structures such as a Pagoda, Office and even a 

small pavilion. E30 can also be used as a footpath or a cycle path and temporary path’s for foot traffic around 

caravan parks, fate’s, building sites, country shows and other outside events. 

EH40 is ideal for Drives, unmade roads, car parks, caravan sites, paddocks, agriculture. 

E30 Ecogrid - for use as paths & shed bases - from £12.90m 2 

EH40 Ecogrid - for use as driveway & car parks - from £14.59m 2 

EH40 Ecogrid permeable paving used for a new gravel filled driveway 

E30 Ecogrid permeable paving used for a new gravel filled shed base 

ECOGRID PERMEABLE PAVING ALL PRICES INCLUDE VAT 



37

Support for you 

Design, Surveys, Training & Guarantees 

Design & Site Surveys 

Our staff are qualified and experienced. If you require 

technical assistance you can request a site visit for your damp 

proofing or basement conversion project. We offer FREE 

design and specification services. 

Manufactures & In-House Training 

We organise regular training courses on damp proofing and structural waterproofing. 

Contractors from all backgrounds, but in particular plasterers and general builders can 

attend a course. With our ongoing technical support and using our approved brands you 

can get access to our various guarantees and insurances. 

Guarantees 

We can offer 5 and 20 year product guarantee certificates 

to contractors, landlords and homeowners. 

Contractors who have existing accreditations or attend 

training courses can get access to our valuable insurance 

guarantee scheme for 10 and 20 year insurance backed 

guarantee for damp proofing and tanking. 

Delivery 

We can provide same day and next day local delivery FREE with our own van. Alternatively, 

we offer next day tracked courier deliveries with various couriers like APC, UK Mail and 

Interlink Express. In most circumstances you will receive a email or text message with your 

anticipated delivery time slot, enabling you to better plan your day. 

38 



Terms 

& Conditions 

Price & Payment 

The price payable for the goods you order is as set out at the time you place your order plus any charges for delivery and 

insurance as quoted. 

All prices include VAT. Alliance Remedial Supplies VAT number is 119 9143 03. 

We reserve the right to change the price of commodity goods, such as those containing significant amounts of copper 

or nickel or the like, due to market conditions but we will confirm the prevailing price with you before accepting your 

order. We are not obliged to accept your order for such goods and may decline it or limit the order quantity. 

Occasionally an error may occur and goods may be incorrectly priced in which circumstances we will not be obliged to 

supply the goods at the incorrect price. 

We must receive payment for the whole of the price of the goods you order, and any applicable charges for delivery, 

before your order can be processed unless we have agreed otherwise in advance in writing. 

Credit Account 

Customers are invited to apply for a credit account where purchases are invoiced on the day the goods are received and 

settled 30 days after invoice date. 

Delivery 

There will be one person per vehicle and for health and safety reasons the driver is only contracted to deliver kerbside, 

delivery inside a customer’s property is at the driver’s discretion. 

For pallets deliveries please have arrangements in place to unload your pelleted goods or advise us if a tail lift vehicle is 

required. Some pallet couriers make a charge for re-delivery. We have to pass this on to the customer when this occurs. 

Please note that for all items delivered by courier, it is the customers responsibility to ensure adequate vehicular access 

and the provision of suitable offloading equipment, where required. 

PLEASE DO NOT ARRANGE TO INSTALL THE ITEMS UNTIL AFTER THEY HAVE BEEN DELIVERED AND CHECKED FOR 

DAMAGE AND/OR SHORTFALLS. ALLIANCE REMEDIAL SUPPLIES LTD OR ITS AGENTS ARE NOT LIABLE FOR ANY 

INSTALLER OR CONTRACTOR COSTS, CONSEQUENTIAL LOSS OR COMPENSATION IN ANY WAY. IN THE UNLIKLY EVENT 

THAT YOU HAVE NOT RECEIVED ALL THE GOODS WITHIN THE STATED DELIVERY TIME OR ITEMS ARE DAMAGED AND OR 

MISSING, YOU MUST NOTIFY US WITHIN 2 DAYS. AFTER THIS PERIOD WE WILL ASSUME THAT EVERYTHING IS 

SATISFACTURY. 

You will become the owner of the goods you have ordered when they have been delivered to you. Once goods have 

been delivered to you they will be held at your own risk and we will not be liable for their loss, damage or destruction. 

Our full terms and conditions can be found at www.allianceremedialsupplies.co.uk 

Company registration number: 07814823 



39

Visit our brand new web site… 

It works where you are 

Our re-designed web site allows you to view the site wherever you are. It can be viewed 

effortlessly on desktop PC’s, tablets or on the move with smartphones. 

The information you need 

Technical data sheets along with ‘how to’ product information allows you to choose the 

correct product for you. Easy to navigate with products split into categories and 

sub-categories. 

Completely transparent pricing policy 

The price you see is the price you pay. All prices are inclusive of VAT, no surprises when you 

check out. All products qualify for FREE ECONOMY DELIVERY with options to upgrade your 

delivery to suit your specific requirements. 

allianceremedialsupplies.co.uk 

01329 235252 

40

2016 Product Guide

Create successful ePaper yourself

Delete template?

Save as template?