Combilift A combination of stacking and moving cars closer together Compact parking on 2 to 3 levels with just one driving lane Variable arrangement of 2 to 10 grids beside one another Independent parking High level of operating and functional safety (German TÜV tested/CE certified) Combilift 551 System with 2 parking levels without pit. There is always one empty space on the entrance level which allows the direct access to the required parking space at any position. To lower a parking space of the upper level, the parking spaces on the entrance level are horizontally shifted in order to position the empty space under the selected parking space. Combilift 552 This system can be arranged in 2 rows behind each other. A smart com bi nation is to put in a Combilift 551 system behind a Combilift 552. The empty space in the first row will be positioned in such a way that it is possible to drive through to reach the selected parking space, located in the rear row. For the 2 row arrangement, platform widths of at least 2,50 m shall be considered. Function of Combilift 551 1 2 4 3 5 The vehicle on parking place 4 is requested. 1 2 3 5 4 Easy operation with several control options Low-wear, proven hydraulic The parking places along the entrance level are shifted to the left. systems High level of »user-friendliness« Platform load 2,0 t or 2,6 t 1 2 3 5 4 Combilift 552/551 arranged behind each other Parking place 4 is lowered down to the entrance level, the vehicle is now ready for exit. Combilift 542 With a height of 2,20 m as for conventional garages this variant offers 2 parking levels with a pit. Space enough to accomodate SUVs or cars with railings on the upper level. The lower level platform is lifted if the empty space is available above it. The cars are parked safely behind doors. Combilift 543 The most compact space saving combilift for parking on 3 levels. The entry is always on the entrance level. As with Combilift 542 the cars are parked safely behind sliding doors which can only be opened once the requested parking place has reached the required position. Function of Combilift 543 OG 1 3 6 9 12 UL EG 4 7 10 13 12 EL UG 2 5 8 11 14 LL The vehicle on UL place 69 is requested. OG EG 1 3 6 4 7 10 9 13 12 UL EL UG 2 5 8 11 14 LL UL place 12 is vertically lifted. OG 1 3 6 9 12 UL EG 4 7 10 13 EL UG 2 5 8 11 14 LL EL place 13 and 10 are horizontally shifted in sequences of a second until they have reached their neutral position. OG 1 3 1 9 12 UL EG 4 7 6 10 13 EL UG 2 5 8 11 14 LL UL place 6 is lowered into the empty space on EL level; the vehicle is ready for exit. Surface Protection 2014 Drive plates, contact plates, cover plates and, if applicable platform elongation section Hot-dipped galvanized as per DIN EN ISO 1461 with approx. 45 µm zinc layer. Side beams Hot-dipped galvanized as per DIN EN ISO 1461 with approx. 55 µm zinc layer. Middle beams Hot-dipped galvanized as per DIN EN 10326 with 275 g/m², approx. 20 µm zinc layer and additionally top with approx. 60– 80 µm powder coated, stone grey (RAL 7030). For more information please see our data sheet »Surface Protection 2014«.
Combiparker A combination of stacking and moving cars closer together Compact parking on up to 6 levels (556) and up to 8 levels (555) Variable arrangement of 2 to 5 grids beside one another Independent parking Cost-effective comb technology (Combiparker 555) Closed platforms Combiparker 555 With the tried and tested principle of stacking and moving closer together, the new Combiparker 555 creates even more space. With up to 8 levels on top of each other and up to 5 grids next to each other, this system accommodates up to 31 parking spaces. Vehicles are parked in parking levels with the aid of adjustable sliding carrier units. In every second grid, transport lifts ensure the lifting and lowering of vehicles. These grids also serve as the entrances and exits. The vehicle on the red parking place is to be removed. The parking places are moved to the left. The lift is raised and the red parking place is collected onto the lift. The red parking place is then lowered and the vehicle is now ready for exit. (Combiparker 556) Different car heights (Combiparker 555) Different car heights and lengths (Combiparker 556) High level of operating and functional safety (German TÜV tested/CE certified) Easy operation with transponder chips Platform load 2,0 t (556) or 2,6 t (555 + 556) 3,10 m 2,80 m 2,80 m 2,80 m 3,10 m 6,50 m Combiparker 556 The Combiparker 556 can be arranged above-ground with 3 to 6 parking levels stacked on top of each other and 1 to 3 rows one behind the other. All parking places can be selected and used independently. Additional adaptation options offer different platform widths, varying lengths for larger vehicles, and different parking level clearances for the required vehicle heights. The column-free construction ensures that vertical supports are only required at every 2 or 3 parking places next to each other. This means an increased comfort for vehicle parking and retrieval operations and sufficient space, to be able to access parking places in the second or third row. The vehicle on the red parking place is to be removed. The parking places are moved to the right. The red parking place is then lowered… …the vehicle is now ready for exit. 2,70 m 2,50 m 2,50 m 2,50 m 2,70 m 6,20 m