AB Arms 2017 Product Catalog

hare.gfx

American Built Arms Company is a veteran-owned, small business

enterprise that manufactures all of its products in the U.S.A. under

operators. Our products are manufactured in the State of

Pennsylvania keeping American's employed in this country. The

industry.

We currently sell our products through a distributor and dealer

network that reaches across our great country. We are focused on

delivering the best products with the best customer support in

the industry. You are our customer and we will treat you with the

highest level of respect. If you need anything or have a question

we are always here to help.

Thank you for your continued business and support.

Jason Combs

President & CEO

American Built Arms Company


AME R ICAN BUILT ARM

/

S C O M PANY

MODULAR RIFLE SYSTEM

The A B Arms MOD X GEN III Modular Ri e System is designed and engineered for

military, law enforcement, and hunting enthusiasts. The MOD X GEN III Modular Ri e

System is a lightweight (3 lbs. 2 oz.), ergonomic, drop-in chassis built for a variety of

short action ri es. It serves as a modular foundation on which tactical accessories can be

added according to the operator’s needs.

Aluminum, hard coat anodized to Mil-Spec Type III

Easy to assemble, drop-in design

0 MOA built into Mil Spec 1913 scope rail

KeyMod Standard on three sides of the forearm

free for utmost accuracy (no V-block)

Designed to accept any AR-15 style butt stock and pistol grip

Uses AICS-style magazines in .308 and .223/300BO

LOP Adjustability: 10.62”- 17.25”

Will accept barrel lugs up to 1.21” wide and .30” thick

trigger guard

Comes standard with A B Arms Fixed-Adjustable Urban Sniper Stock

and the A B Arms SBR P Grip


AME R ICAN BUILT ARM S C O M PANY

BARRELED ACTION

American Built Arms Company has been selected by Remington Arms

Company to sell the famed Remington® Model 700 SPS Tactical AAC-SD

Barreled Action. Combine this iconic barreled action with the A*B Arms

MOD*X GEN III chassis to build a custom dream rifle!

#86502

.308 - 20” Heavy Barrel with 5/8-24 Threaded Muzzle

6.5 Creedmoor - 22” Heavy Barrel with 5/8-24 Threaded Muzzle

Accepts AAC® and other 5/8-24 threaded flash hiders, muzzle

brakes and suppressors

1 in 10” Rate of Twist for increased bullet stability

X-Mark Pro® externally adjustable trigger system factory set at

3½ lbs. and adjustable to 2½ lbs.

AAC® is a trademark of Advanced Armament Corporation

Remington and X-Mark Pro are trademarks of RA Brands, LLC

www.abarms.com


AME R ICAN BUILT ARM S C O M PANY

AR-15 PARTS

American Built Arms Company’s AR-15 parts are specially made on high end Swiss

you can find. A B Arms manufactures bolts for some of the top AR manufacturers

in the firearms industry. Also offered is an A B Arms Mil-Spec, 5.56 bolt assembly

and cam pin kit.

#ABAMSE5.56

Extractor

Quality E4140 Steel. They are all heat

treated, shot peened as per Mil-Spec

requirements and coated in a

#ABACPE

#ABAES

#ABAGR

#ABAMSFP

Cam Pin

All cam pins are made of E4140 Steel

and are heat treated as per Mil-Spec

requirements. They are also coated

with Nickel Boron.

Ejector and Spring

The ejector and spring fits all Mil-Spec

AR-15 style bolts. Made out of S7 steel,

shot peened and heat treated.

Gas Rings

Mil-Spec gas rings

Firing Pin

Made from AISI 8740 steel and chrome

plated.


AME R ICAN BUILT ARM S C O M PANY

utiliz

The

the o

to ad

A B Arms A B Pro Bolt Assembly is built to Mil-Spec dimensions. The Nickel

Boron coated bolt needs virtually no lube during use. The Manganese Phosphate

firing.

These bolt assemblies are ready to drop into your bolt carrier group. These bolts

surface finish. A B Arms is known by rifle manufacturers for manufacturing one

of the finest quality bolts and extractors available. This has won us contracts with

some of the highest quality AR manufacturers in the business. If you want to buy

super high quality parts offered by the company that actually manufactures them,

then you've come to the right place.

#ABA5.56B

Bolt

Carpenter 158 or 9310 Steel

Heat treated per Mil-Spec Requirements

Shot Peened per Mil-Spec Requirements

MPI Tested Material

Nickel Boron Coated

Extractor

Heat treated per Mil-Spec Requirements

Shot Peened per Mil-Spec Requirements

Maganese Phosphate Coated Per Mil-Spec Requirements


carbine style buffer tube.

AME R ICAN BUILT ARM S C O M PANY

is a sniper-style stock with an adjustable cheek riser and buttplate. It’s

buttstock with a spring-loaded buttplate that allows you to push a button

t the length of pull.

5.56 BOLT CARRIER GROUPS

A B Arms A B Pro 5.56 Bolt Carrier Groups are ready to drop into your rifle. Our Bolt Carrier

Groups are specially made on high end Swiss machinery to have exacting tolerances and

surface finish. A B Arms is known by rifle manufacturers for manufacturing one of the

finest quality bolts and extractors available. This has won us contracts with some of the

highest quality AR manufacturers in the business. If you want to buy super high quality parts

offered by the company that actuness. If you want to buy super high quality parts offered by

the company that actually manufactures them, then you've come to the right place.

#ABABCGNiB

Bolt

Each bolt is machined out of MPI

tested Carpenter 158 Steel. They

are heat treated, shot peened as

per Mil-Spec requirements and

coated with Nickel Boron.

Extractor

Every extractor is made of

are all heat treated, shot peened

as per Mil-Spec requirements

and coated in a Manganese

Firing Pin

Made from AISI 8740 steel and

are chrome coated.

Carrier

#ABABCGNiB: 8620 material, M-16

style, nickel boron coated.

Cam Pin

All cam pins are made of E4140

Steel and are heat treated as per

Mil-Spec requirements. They are

also coated with Nickel Boron.

Bolt Carrier Gas Key

#ABABCGNiB: 4130 material, nickel

boron coated, 4140 staked gas key

screws per Mil-Spec Requirements.


AME R ICAN BUILT ARM S C O M PANY

The American Built Arms Company Urban Sniper Stock (USS ) is a compact,

lightweight, ergonomic buttstock, that can be used on any weapon system that

utilizes a carbine style buffer tube.

The USS is a sniper-style stock with an adjustable cheek riser and buttplate. It’s

the only buttstock with a spring-loaded buttplate that allows you to push a

button to adjust the length of pull.

#

Closed

Opened

Fixed-Adjustable design – creates a rock-solid stock that eliminates

movement and noise found in conventional carbine stocks

Has a solid fixed stock body with an adjustable, spring loaded butt pad

Spring loaded butt pad extends 1.25” with the touch of a button and is

adjustable in .45” increments with four positions

At 9.5 ounces and 6.7” in length (collapsed), the Urban Sniper Stock is

the smallest and lightest sniper-style butt stock on the market

Mounted on Mil-Spec buffer tubes

Ambidextrous QD swing swivel mounts

1913 Picatinny rail on the bottom for mounting monopods and other

accessories

Removable, fully adjustable and ambidextrous cheek riser system

Forward mounted, ergonomic and compact 5.25” cheek riser

Cheek riser adjusts 0.75” from the body of the stock

Proprietary formula of heat stabilized nylon reinforced with high

strength fibers


AME R ICAN BUILT ARM S C O M PANY

The A B Arms Urban Recoil Pad is designed specifically for the A*B Arms Urban Sniper

Stock. The Urban Recoil Pad is attached to the butt plate of the Urban Sniper Stock by

using two, flat button socket head cap screws (included).

#ABAURP

Mounts right onto USS buttstock plate (2 screws)

Made from durable, medium-high density rubber with

an inner pocket for extra compression during recoil to

help prevent shoulder fatigue/bruising

Doesn’t inhibit adjustability of buttplate

Length 5.06” x Width 1.35”

Thickness - .75”

Weight - 2 Ounces

www.abarms.com


AME R ICAN BUILT ARM S C O M PANY

A B ARMS HAND GUARD

The American Built Arms Company hand guards are the first, truly ergonomic

AR-15 carbine length hand guards manufactured in the United States.

TM

A B Arms Polymer Hand Guard

The hand guards have a two-piece design with upper and lower heat shields for maximum

the “mirage effect” found on hand guards that lack an upper heat shield. They are

designed for carbine-length, gas-piston or direct gas impingement AR-15/M-16 Rifles.

All our hand guards have a purpose built, ergonomic hand grip area with hand stop and

heavy texture. They’re made of a proprietary formula of heat stabilized nylon reinforced

with high strength fibers.

modular design that will accommodate Mil-Spec rail systems for a truly customized

weapon system.


TM

MOD1 Hand Guard

TM

A B PRO Hand Guard

Specs:

Weight: 5.5 ounces

Length: 7 1/8th inches

Height: 2.75 inches

Specs:

Weight: 5 ounces

Length: 7 1/8th inches

Height: 2.69 inches


AME R ICAN BUILT ARM S C O M PANY

SBR V GRIP

American Built Arms Company presents the SBR VGrip designed and engineered

for Bullpups, SBRs, SMGs and the AR-15 family of rifles. The SBR V Grip is born of

technologically advanced materials that not only make it strong, but light weight

and low profile. The weather-resistant internal storage compartment will fit two

products is exemplified in the SBR V Grip.

Short Barrel Rifle Vertical Grip

Designed & manufactured in the USA

by a veteran owned company

I ,

ergonomic

Made from high-heat rated nylon

with high-strength fiber

Designed for Bullpups, SBRs, SMGs,

and the AR-15 family of rifles

SBR V Grip

Private labeling available

Specs:

Height: 3.55”

Length: 3.20”

Width: 1.31”

Opposite side stays constant

as a testament to its roots.

#ABASBRV

#ABASBRVFDE

#ABASBRV

PATENT PENDING


AME R ICAN BUILT ARM S C O M PANY

SBR P GRIP

American Built Arms Company presents the SBR P Grip designed and engineered

for M4/M16/AR-15 style rifles and rifle receivers designed to fit AR-15 style pistol

grips. The SBR P Grip is born of technologically advanced materials that not only

make it strong, but light weight and low profile. The weather-resistant internal

design high quality, tough as nails products is exemplified in the SBR P Grip.

Short Barrel Rifle Pistol Grip

Designed & manufactured in the USA

by a veteran owned company

I ,

ergonomic

Made from high-heat rated nylon

with high-strength fiber

Designed for M4/M16/AR-15 family

of rifles

PATENT PENDING

color matching available

Private labeling available

#ABASBRP

Specs:

Height: 3.88”

Length: 2.97”

Width: 1.20”

#ABASBRP

#ABASBRPFDE


AME R ICAN BUILT ARM S C O M PANY

LTF MIL-STD RAILS

were designed as a complimentary accessory to the A B Arms hand guards, as

well as most hand guards available on the market today.

A B Arms LTF Mil-STD Picatinny Rails

Light weight polymer material reinforced

with high strength fibers

designed to deliver maximum

reliability

Integrated hardware molded directly

into the part to add strength and

durability

#ABALTFCR

Integrated bolt with lock washer to

hardware

High heat resistance

#ABALTFCRFDE


AME R ICAN BUILT ARM S C O M PANY

The A B Arms Tactical Upgrade Kit is designed and engineered for military, law enforcement, and firearms

enthusiasts. The TUK combines three, top-of- the-line A B Arms AR-15 accessory brands; the A B Arms A B

Pro Hand Guard, the A B Arms SBR P Grip pistol grip and the A B Arms Urban Sniper Stock.

#ABATUKPB

A B Arms SBR P Grip

Made from high-heat rated nylon with high strength fiber

AA and CR123 battery compartment

Weight: 2.5 ounces

A B Arms Urban Sniper Stock

Fixed-Adjustable design – creates a rock-solid stock with 28

locking positions that eliminates movement and noise found in

conventional carbine stocks

Removable, fully adjustable and ambidextrous cheek riser system;

adjusts 0.75” from the body of the stock

Weight: 9.5 ounces and 6.7” in length (collapsed)

A B Arms A B Pro Hand Guard

This hand guard is a two piece design with upper and lower heat

shields for maximum cooling (Check out our hand guard heat test

video by using the QR code below)

For carbine-length AR15/M16 Rifles

Weight: 4 ounces

www.abarms.com


AME R ICAN BUILT ARM S C O M PANY

A B ARMS T GRIP

American Built Arms Company presents the A B Arms T Grip designed and engineered for the TAVOR®

SAR. We saw that the TAVOR® SAR had limited accessories and the ones that were available through other

specifically for the TAVOR®.

A B Arms T Grip

in the gap between the lip and grip, which is a common

complaint with other grips on the market.

Patent pending ergonomic design gives positive control

of the TAVOR®. Prevents unwanted rotation which can be

found in circular vertical grips.

Length is shorter than most vertical grips keeping it low

Slight inward angle lessens chance of catching on

clothing and gear.

Made of a polymer composite material with two bolt

attachments providing extra strength.

Designed & manufactured in the USA by a veteran

owned company.

AA and CR123 battery compartment.

Fits on any MIL-STD 1913 Picatinny rail.

PATENT PENDING

#ABASBRT

Specs:

Height: 3.55”

Length: 3.20”

Width: 1.31”

#ABASBRTFDE


AME R ICAN BUILT ARM S C O M PANY

A B ARMS T RAIL

American Built Arms Company presents the T Rail designed and engineered for the

TAVOR rifle.

The T Rail (TAVOR Rail) Aluminum is manufactured from 6061-T6 material that is type 3

specifically for the TAVOR rifle and provides the ability to mount your accessories on the

hand guard. Our commitment to offer high quality, tough as nails products is exemplified

in the T Rail Aluminum. If you can find a stronger rail on the market we will take it back no

Features:

Designed & manufactured in the USA

ergonomic

Made from 6061-T6 Aluminum and

type 3 hard coat anodized

Fills area between hand guard and grip


AME R ICAN BUILT ARM S C O M PANY

MDT Detachable box magazines are designed to fit the A*B Arms MOD*X Modular

Rifle System (All GENs). They are manufactured from high quality polymer and uses a

tempered steel spring. We put our magazines through vigorous testing. We have

used high quality strength polymer with a high glass content to ensure durability and

strength. Available in both .223 & .308.

#AISMAG308

#AISMAG223


AME R ICAN BUILT ARM S C O M PANY

American Built Arms Company presents the Side Folder Mechanism (SFM) for the

MOD*X GEN III Modular Rifle System. This part can be used to upgrade your existing

MOD*X GEN III Fixed Stock version to create a lightweight side folding chassis.

Assembly takes less than 10 minutes and does not require any special tools. The SFM

is manufactured with 6061 aluminum and hard coat anodized to Mil-Spec Type III

specifications.

#ABAMXSFM


AME R ICAN BUILT ARM S C O M PANY

American Built Arms Company presents the MOD*X GEN III Xtreme Hand Guard

designed for the A*B Arms MOD*X GEN III Modular Rifle System. The Xtreme Hand

Guard adds an additional two (2) inches to the factory ready 11.5" hand guard. Like the

standard factory hand guard, the Xtreme Hand Guard serves as a modular foundation

on which tactical accessories can be added according to the operator’s needs.

Aluminum design, hard coat anodized to Mil-Spec Type III

Scalloped front design

Easy to assemble, "keyed" design

KeyMod Standard on three sides of the forearm for mounting equipment

Conventional slots for mounting Geissele® Automatics accessories on two sides (45 degrees)

of the forearm

Lightweight, 13.5” free-floating modular forearm

Will accommodate barrels as thick as the action

#ABAMX3XHG


AME R ICAN BUILT ARM S C O M PANY

MOD*X Tactical SHOTGUN System

The A B Arms MOD X Tactical Shotgun System is a bolt-on replacement stock. The “Fixed-Adjustable”

buttstock which includes the A B Arms Enhanced Buffer Tube and spring loaded butt pad allows for

up to 28 different locking positions. The adapter easily bolts to rear of the receiver without any

alterations to the shotgun.

CompatIble with

#ABAMXM500TSS

#ABAREM7600TS

#ABAMXR870TSS

The A B Arms MOD X Tactical Shotgun System is a

lightweight, ergonomic butt stock that provides a

quality, flexible upgrade to the existing factory stock.

L.O.P. adjusts from 12.25” to 16.5” with 28 possible

locking positions

Weighs only 1 lb. 9 oz.

Aluminum adapter is made out of 6061 T6 and is Class 3,

hard-coat anodized

Includes A*B Arms Urban Sniper Stock and Ergo 4009

pistol grip. Made out of high-strength polymer

Stock adapter available individually

Adapter accepts standard AR-15 grips and carbine

receiver extensions

www.abarms.com


AME R ICAN BUILT ARM S C O M PANY

The Keystone PT “Precision Trainer” is a lightweight, ergonomic rifle featuring the Keystone

722 caliber, bolt-action rifle housed in an A*B Arms aluminum chassis system. The Keystone

PT is designed for:

Rifle enthusiasts of all ages

Shooters looking to enhance their marksmanship with an affordable alternative

A training rifle for precision shooting competitions

Folks looking to take-down annoying varmints

#KSA20450

Designed and manufactured in the U.S.A. by

veteran-owned companies

Includes Keystone 722, threaded, heavy bull barrel

Housed in the American Built Arms Company MOD*X PT

aluminum chassis system

Made from 6061 T6 Aluminum

Class 3, hard-coat anodized

A*B Arms Urban Sniper Stock (LOP is 10.5” out to 13.75”)

A*B Arms P*Grip pistol grip

Total length – short – 30.75”

Total length – long – 34”

Total weight – 6 lbs. (96 oz.)

Includes one seven (7) round, Keystone 722 magazine

www.abarms.com


AME R ICAN BUILT ARM S C O M PANY

American Built Arms Company presents the MOD X Ri e designed and engineered for

military, law enforcement, and shooting enthusiasts. The A B Arms MOD X Ri e is a

lightweight, ergonomic, tactical ri e featuring the Remington® Model 700 SPS Tactical

AAC-SD barreled action. The ri e provides a modular foundation on which tactical

accessories can be added according to the operator’s needs.

#ABAMXR308

Designed and manufactured in the U.S.A. by a Veteran-Owned company

Features the Remington Model 700 SPS Tactical AAC-SD

.308 - 20” Heavy Barrel with 5/8-24 Threaded Muzzle

6.5 Creedmoor - 22” Heavy Barrel with 5/8-24 Threaded Muzzle

1:10 Rate of Twist

X-Mark Pro® Externally Adjustable Trigger Set at 3 1/2 Pounds

6061 T6 aluminum chassis; hard coat anodized to Mil-Spec Type III

0 MOA scope rail included. 20 MOA scope rail accessory available

KeyMod Standard on three sides of the forearm for mounting equipment

Conventional slots for mounting Geissele® Automatics accessories on two

sides of the forearm

Lightweight, 13.5” free-floating modular forearm

Comes standard with A*B Arms Urban Sniper Stock, Urban Recoil Pad

and the Ergo 4009 pistol grip

Uses AICS-style .308 magazines

Fixed stock version - Length of Pull adjustability of 10.62” to 15.69”

Side-folder stock version - Length of Pull adjustability of 12.35” to 17.25”

Trigger well will accept all after-market trigger systems

Integrated push button magazine release located at the front of the

trigger guard


www.abarms.com | 443.310.8777

More magazines by this user
Similar magazines