09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Referring now <strong>to</strong> Figs 2, 3 and 4 in particular, a physical embodiment of the energy conversion system<br />

shown in Fig.1 is shown. The electrodes 16 and 18 are in the form of circular plates or discs made of an<br />

electrically conductive metal having external surfaces 40 and 42 adapted <strong>to</strong> be charged from the external<br />

source as already mentioned. The internal surface 44 of electrode 18 is thereby adapted <strong>to</strong> maintain a<br />

positive charge opposite in polarity <strong>to</strong> the negative charge of the electrode 16 which is maintained in a stable<br />

ion form within a dielectric surface portion 46 of the electrode 16. The energy conversion system may be<br />

enclosed within an outer housing 48 <strong>to</strong> which the electrodes 16 and 18 are secured.<br />

With continued reference <strong>to</strong> Fig.2, the sta<strong>to</strong>rs 20 and 22 mounted by housing 48 in axially fixed spaced<br />

relation <strong>to</strong> the electrodes 16 and 18 are provided with bearings 50 and 52 supporting the powered ro<strong>to</strong>r shaft<br />

driving the shaft assembly which has electrically conductive shaft sections 54 and 56 <strong>to</strong> which the ro<strong>to</strong>rs 24<br />

and 26 are respectively connected. In the embodiment illustrated in Fig.2, the drive mo<strong>to</strong>r 28 is mechanically<br />

interconnected with the shaft sections 54 and 56 through an electrically nonconductive shaft section 58 of<br />

the power shaft assembly for the simultaneous rotation of both ro<strong>to</strong>rs 24 and 26 at the same speed and in<br />

the same direction about their common rotational axis perpendicular <strong>to</strong> the parallel spaced planes with which<br />

the electrode and sta<strong>to</strong>r discs are aligned. The electrically conductive shaft sections 54 and 56 are<br />

respectively keyed or secured in any suitable fashion <strong>to</strong> hub portions 60 and 62 of the ro<strong>to</strong>rs and are<br />

provided with flange portions 64 and 66 forming electrical wipers in contact with confronting surfaces of the<br />

sta<strong>to</strong>rs 20 and 22, which are inductively charged by the static electric fields 12 and 14 <strong>to</strong> equal levels of<br />

opposite polarity.<br />

11 - 93

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!