09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

In Fig.7 the oscillation circuit is closed through the earth (E and E 1 ). The spark gap 7 may be increased or<br />

reduced by means of a contact arm 7b.<br />

Fig.8 shows a unipolar connection of the mo<strong>to</strong>r with the aerial network. Here, two oscillation circuits are closed<br />

through the same mo<strong>to</strong>r. The first oscillation circuit passes from aerial A through electromagnet S, point x,<br />

inductance 9a <strong>to</strong> the earth capaci<strong>to</strong>r 6, across spark gap 7 <strong>to</strong> the aerial capaci<strong>to</strong>r 5 and back <strong>to</strong> point x. The<br />

second oscillation circuit starts from the aerial 5 at the point x1 through induc<strong>to</strong>r 9 <strong>to</strong> the earth capaci<strong>to</strong>r 6 at the<br />

point x3, through capaci<strong>to</strong>r 6, across spark gap 7 back <strong>to</strong> point x1. The mo<strong>to</strong>r itself, is inserted between the two<br />

points of spark gap 7. This arrangement produces slightly dampened oscillation wave currents.<br />

Fig.9 shows a loosely coupled system intended for small mo<strong>to</strong>rs for measuring purposes. A is the serial, S is the<br />

electromagnet or aerial induc<strong>to</strong>r, 9 the induc<strong>to</strong>r, 7 the spark gap, 5 and 6 capaci<strong>to</strong>rs, E the earth, M the mo<strong>to</strong>r, and<br />

1 and 2 the sta<strong>to</strong>r connections of the mo<strong>to</strong>r which is directly connected <strong>to</strong> the oscilla<strong>to</strong>r circuit.<br />

A - 505

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!