09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

This plate array can be a self-contained unit with the end plates reinforced against flexing with either a thick piece<br />

of acrylic plastic or by making them out of thick stainless steel. All metal components inside the electrolyser need<br />

<strong>to</strong> be made of the same grade of metal, otherwise galvanic erosion will take place as the whole inside of the<br />

electrolyser will have a damp conductive gas in it. The arrangement could be like this:<br />

Here an evenly spaced ring of bolt holes <strong>to</strong> take 8 mm bolts is drilled around three edges of each of the 151<br />

plates. The holes will be 8.5 mm in diameter if 8 mm threaded plastic rods are used. The spacing of the holes is<br />

just under two inches as 3 mm clearance is needed at the edges and the stainless steel plates supplied may not<br />

be exactly 2 feet by 1 foot but one sixteenth of a metric size plate. The exact plate size is not critical nor is the<br />

exact spacing of the threaded rods.<br />

It may be preferred <strong>to</strong> use stainless steel threaded rods rather than the less robust plastic rods, in which case the<br />

hole diameter will be increased, probably <strong>to</strong> 10 mm or the threaded rod diameter reduced <strong>to</strong> 6 mm as the whole<br />

length of the rod running through the plates will be encased in plastic sleeving in order <strong>to</strong> prevent electrical<br />

contact between the plates and the rods as shown here:<br />

The 150 gaskets match the edges of the plates and have a width of 6 mm greater than the diameter of the hole<br />

drilled for the rods which clamp the plate array <strong>to</strong>gether:<br />

A - 1353

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!