09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Without his description of the device, it would be difficult <strong>to</strong> understand it's construction and method of operation.<br />

As I understand it, the circuit of what is mounted on this board is as shown here:<br />

This arrangement has bothered some readers recently as they feel that the spark gap should be in series with the<br />

L1 coil, like this:<br />

This is understandable, as there is always a tendency <strong>to</strong> think of the spark gap as being a device which is there <strong>to</strong><br />

protect against excessive voltages rather than seeing it as an active component of the circuit, a component which<br />

is in continuous use. In 1925, Hermann Plauson was granted a patent for a whole series of methods for<br />

converting the high voltage produced by a tall aerial system in<strong>to</strong> useable, standard electricity. Hermann starts off<br />

by explaining how high voltage can be converted in<strong>to</strong> a convenient form and he uses a Wimshurst static electricity<br />

genera<strong>to</strong>r as an example of a constant source of high voltage. The output from a rectified Tesla Coil, a<br />

Wimshurst machine and a tall aerial are very much alike, and so Hermann's comments are very relevant here. He<br />

shows it like this:<br />

Here, the output of the Wimshurst machine is s<strong>to</strong>red in two high-voltage capaci<strong>to</strong>rs (Leyden jars) causing a very<br />

high voltage <strong>to</strong> be created across those capaci<strong>to</strong>rs. When the voltage is high enough, a spark jumps across the<br />

spark gap, causing a massive surge of current through the primary winding of the transformer, which in his case is<br />

a step-down transformer as he is aimed at getting a lower output voltage. Don's circuit is almost identical:<br />

A - 1377

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!