09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

that the current flowing through the induc<strong>to</strong>r generates a back EMF whose energy is used <strong>to</strong> provide both<br />

additional energy <strong>to</strong> the circuit itself, and the back EMF energy <strong>to</strong> the energy-receiving device.<br />

In a preferred form of the method, the back EMF is generated by interrupting the current flow through the induc<strong>to</strong>r,<br />

ideally, interrupting and res<strong>to</strong>ring the current flow repeatedly and rectifying the current. The rate of interruptions<br />

should be at least 40 times per second and preferably 50 or more times per second. The duty cycle of the<br />

interruption should be at least 50% and ideally be 75%. That is, the current flow through the induc<strong>to</strong>r is "On" for<br />

50% <strong>to</strong> 95% of the time and "Off" for 50% <strong>to</strong> 5% of the time.<br />

In a further preferred form of the invention, a back EMF is generated which is large enough <strong>to</strong> cause the<br />

comparative energy efficiency <strong>to</strong> be at least unity. This can be achieved by setting and controlling a suitable<br />

value for a variable selected from one or more of:<br />

The frequency of interruptions from the wave rectifier;<br />

The duty cycle;<br />

The thickness of the wiring in the circuit;<br />

The efficiency of the induc<strong>to</strong>r core,<br />

the value being set in accordance with the operational requirements of the desired application.<br />

In another preferred form of the invention, the energy-receiving device is either an energy-requiring load, and/or<br />

an energy s<strong>to</strong>rage device, ideally a replenishable source of either DC or AC electrical energy. Ideally, the method<br />

also includes providing at least one inductive load associated with each receiving device. The induc<strong>to</strong>r may be a<br />

transformer or other suitable inductive device.<br />

A second aspect of the invention is a method of res<strong>to</strong>ring electrical energy <strong>to</strong> a source, which is done by providing<br />

a closed circuit containing a source of electrical energy which passes current through the induc<strong>to</strong>r, creating an<br />

extruded magnetic field around the induc<strong>to</strong>r, which field is then collapsed, creating a back EMF which is then fed<br />

<strong>to</strong> the source with an energy usage efficiency fac<strong>to</strong>r of 1 or more when compared <strong>to</strong> a Resis<strong>to</strong>r Temperature<br />

Versus Wattage Calibration Circuit.<br />

This feedback of energy can be <strong>to</strong> an energy-requiring load or <strong>to</strong> an energy s<strong>to</strong>rage device.<br />

In a further preferred form of the invention, the bias-changing mechanism is a wave rectifier and the method of<br />

use is <strong>to</strong> make the wave rectifier output interrupt the electric current.<br />

Ideally, the induc<strong>to</strong>r used should have a solid core which is capable of inducing a magnetic moment associated<br />

with a collapsing magnetic field.<br />

The method used in this invention includes selecting a value for:<br />

The frequency of interruptions from the wave rectifier;<br />

The duty cycle;<br />

The thickness of the wiring in the circuit;<br />

The efficiency of the induc<strong>to</strong>r core,<br />

so that the magnitude of the back EMF generated when the magnetic field collapses, is in a predetermined range<br />

which suits the requirements of the energy-receiving device and its intended use.<br />

In one preferred form of the invention, the induc<strong>to</strong>r is a transformer with a primary winding large enough <strong>to</strong> create<br />

sufficient voltage from the back EMF, <strong>to</strong> feed power back in<strong>to</strong> the circuit. If the current feeding the induc<strong>to</strong>r is AC,<br />

then the current interrup<strong>to</strong>r can be a diode or a triac.<br />

A further aspect of the invention is an apparatus comprising an induc<strong>to</strong>r having a core suitable for the generation<br />

of back EMF from collapsing magnetic fields, and an electrical circuit containing that induc<strong>to</strong>r, a replenishable<br />

energy source, and energy-receiving device and means for changing orbital bias of a magnetic field set up in use<br />

and associated with the induc<strong>to</strong>r, both it and the source with variable frequency and variable Mark-Space ratio,<br />

being configured <strong>to</strong> operate the induc<strong>to</strong>r, and arranged so that the magnetic field of the induc<strong>to</strong>r is made <strong>to</strong><br />

collapse and be res<strong>to</strong>red repeatedly, thereby generating electrical energy, the circuit being capable of conducting<br />

the energy and providing it <strong>to</strong> the energy-receiving device.<br />

A - 1433

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!