09.02.2018 Views

Practical Guige to Free Energy Devices

eBook 3000 pages! author: Patrick J. Kelly "This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion. Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. " THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO. ​

eBook 3000 pages!
author: Patrick J. Kelly

"This eBook contains most of what I have learned about this subject after researching it for a number of years. I am not trying to sell you anything, nor am I trying to convince you of anything. When I started looking into this subject, there was very little useful information and any that was around was buried deep in incomprehensible patents and documents. My purpose here is to make it easier for you to locate and understand some of the relevant material now available. What you believe is up to yourself and is none of my business. Let me stress that almost all of the devices discussed in the following pages, are devices which I have not personally built and tested. It would take several lifetimes to do that and it would not be in any way a practical option. Consequently, although I believe everything said is fully accurate and correct, you should treat everything as being “hearsay” or opinion.

Some time ago, it was commonly believed that the world was flat and rested on the backs of four elephants and that when earthquakes shook the ground, it was the elephants getting restless. If you want to believe that, you are fully at liberty to do so, however, you can count me out as I don’t believe that. "

THE MATERIAL PRESENTED IS FOR INFORMATION PURPOSES ONLY. SHOULD YOU DECIDE TO PERFORM EXPERIMENTS OR CONSTRUCT ANY DEVICE, YOU DO SO WHOLLY ON YOUR OWN RESPONSIBILITY -- NEITHER THE COMPANY HOSTING THIS WEB SITE, NOR THE SITE DESIGNER ARE IN ANY WAY RESPONSIBLE FOR YOUR ACTIONS OR ANY RESULTING LOSS OR DAMAGE OF ANY DESCRIPTION, SHOULD ANY OCCUR AS A RESULT OF WHAT YOU DO.

SHOW MORE
SHOW LESS
  • No tags were found...

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Fig.7 above, illustrates the options for the two different types of resonant coil Lr. Basically, there are two coil<br />

options: the standard iron core power transformer and the high frequency Tesla type coil such as the ignition type<br />

coil. You will need <strong>to</strong> determine the type of output you wish <strong>to</strong> have in the overall design. For conventional<br />

designs you would most likely construct the standard transformer shown at the bot<strong>to</strong>m of the diagram, which<br />

consists of a core filled with powdered iron or Metglass.<br />

Fig.8 above, discusses the charge displacement dynamics involved in the E-Stress Amplifier power system.<br />

Diagram A illustrates the induction-less coil Lo waveform. Diagram B depicts the displaced charge spins when<br />

the voltage and current rise as the induction-less coils are pulsed, while diagram C shows the waveform during<br />

the return <strong>to</strong> the previous charge patterns, starting the cyclic over again.<br />

The Ramaswami Power Transformer<br />

Recently, Mr N. Ramaswami of India has produced a transformer design which uses AC mains as the input and at<br />

the present time has an output of more than 600V. It is his desire <strong>to</strong> share the information freely so that anyone<br />

may replicate his construction, and so, here are the details.<br />

The overall arrangement is comprised of several coils wound on a single magnetic core, which, in the case of the<br />

pro<strong>to</strong>type, was constructed by inserting many iron rods of about 6 mm diameter, inside a standard plastic pipe of<br />

between about 60 mm <strong>to</strong> 100 mm in diameter:<br />

The cores are made from a large bundle of uninsulated iron rods and seen from the end, the tube looks like this:<br />

3 - 211

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!