You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Click the OK button when you finish adding models and go to the next process.
(3D) Face Orientation
The Face Orientation step displays. Here you may assign different face styles to every model by
clicking the model on the image and then selecting a suitable style.
You may also click the Face Orientation button to invoke the Face Orientation step again after
exiting the wizard to re-assign different face styles to each model.
Utilize the tool to rotate the oval wire to best fit the orientation of the face on the image. Do
not worry if the wire does not perfectly fit the face on the image since this panel is only for
deciding the rotation strength of the profile.
Strength: Drag the slider to adjust the movement strength of the profile as the model rotates.
Preview: Toggle this button and move your mouse around to see the effects of the Strength in
the viewport. Toggle it again to leave the Preview mode.