Ecu Modules Repair Ebook PDF
Ecu Modules Repair eBook Basic Electronics: ✔Introduction to electronics ✔How to handle a multimeter ✔Symbols and grids of electronics ✔Main components of an ECU
Ecu Modules Repair eBook
Basic Electronics:
✔Introduction to electronics
✔How to handle a multimeter
✔Symbols and grids of electronics
✔Main components of an ECU
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
motoscan.motoscan@gmail.com 29 Jan 2023
1 Terminal indicated with 10AMAX - We must connect the
red test tipfor measuring current
continuous or alternating pressure greater than 200mA.
Note: Some digital multimeters do not have
the option to measure alternating current. Before
do the test make sure the multimeter has this
option.
2 Terminal indicated with µA / mA - We must connect the
red test tipfor measuring
amperage (in micro or milli amps). At the
maximum of 200mA.
3 Common terminal, COM - We must connect
always the black test tip.
4 Terminal indicated with V / Ohms / F / Hz - We must
connect the red test lead to measure
voltage (continuous or alternating), frequency, diode,
resistance, continuity, capacitance and hFE.
[>Ecu Modules Repair Ebook PDF<]
Change language