SMA 70 - Sanitas
SMA 70 - Sanitas
SMA 70 - Sanitas
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
cylindrical milling cutter<br />
Removing hardened toenail surfaces and coarse smoothing. Place the cylindrical milling<br />
cutter horizontally on the nail surface and remove the nail layer with slow rotary<br />
movements.<br />
Flame milling cutter<br />
For removing ingrown nails. Insert the flame milling cutter carefully to the point of<br />
interest and remove the appropriate parts of the nail.<br />
Sapphire milling cutter<br />
This attachment is used for careful removal of warts. If you use this attachment, remember<br />
that it is very quick and easy to cut into the skin deeper by accident and injure the<br />
skin over the bone.<br />
A complete set of all seven attachments can be ordered from the service address under order number<br />
162.563.<br />
6. cleaning<br />
Warning! Before cleaning, always unplug the device from the mains.<br />
Warning! Beware of life-threatening electric shock: Never submerge the device in water or other<br />
liquids.<br />
• Clean the device with a slightly moistened cloth. In case of more extreme soiling you can also moisten the<br />
cloth with mild soapy water.<br />
• Clean the attachments after every use to prevent transmission of fungus and other infections to other parts<br />
of the body.<br />
• Use a toothbrush to remove stubborn callus and skin fragments.<br />
• If necessary, clean the attachments with a cloth or brush moistened with disinfectant spray or 90 % alcohol<br />
(obtainable from pharmacies). Then dry the attachments thoroughly.<br />
• Do not use any chemical cleaners or abrasive agents for cleaning.<br />
• Ensure that no water penetrates into the device. If this should ever happen then only use the device once<br />
it is completely dry.<br />
7. Disposal<br />
The appliance should be disposed of according to EC Directive 2002/96/EC-WEEE (Waste Electrical<br />
and Electronic Equipment). In case of queries, please contact the municipal authorities responsible<br />
for waste disposal in your area.<br />
8. technical Data<br />
Nominal voltage: 100–240 V ~ 50/60 Hz<br />
Rated output: 10 W<br />
Speed: Level 1: 3500 +/- 600 rpm<br />
Level 2: 5100 +/- 800 rpm<br />
Short operation: max. 20 min.<br />
Dimensions (LxWxH): 28x23x8 cm<br />
Weight: approx. 1 kg (without packaging)<br />
12