CRM1036 - FERM.com

COMPRESSOR
The numbers in the following text correspond
with the pitcures at page 2 - 4.
Ferm
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Machine details
2. Safety instructions
3. Use
4. Maintenance
1. Machine details
Technical specifications
Voltage 220-240 V~
Frequency 50 Hz
Capacity 1.5 hp (1200 W)
Idling speed 3450 /min
IP Class IP 20
Tank contents 6 litre
Air intake 153 l/min
Max. outlet pressure 8.0 Bar
Weight 11 kg
Sound power level 96 +3 dB (A)
The value of the noise level may rise from 1 to 10
dB(A) as a function of the environment in which
the compressor will be installed.
Product information
Fig. A
1 Cover
2. Handle
3. Switch
4. Automatic stop
5. Pressure regulator
6. Quick coupler (outlet)
7. Pressure gauge (pressure regulator)
8. Pressure gauge (tank)
9. Safety valve
10. Pressure pipe
11. Drain cock
2. Safety instructions
Explanation of symbols
Denotes risk of personal injury, loss of life
or damage to the tool in case of nonobservance
of the instructions in this
manual.
Risk of electric shock.
Caution: the compressor could start
automatically in case of a black-out and
subsequent reset
Wear ear protection.
Sound power level
Special safety instructions
• Warning! The compressor may only be used
in suitable rooms (with good ventilation and an
ambient temperature from +5°C to +40°C).
• It is recommended to use the compressor with
a maximum operation of 70% in one hour
under full load, to allow for proper operation of
the product over time.
• Check that the tank is fully decompressed
before connections with the tank are
unscrewed.
• It is prohibited to make holes in, or welds to, or
purposely to distort the compressed air tank.
• Do not perform any actions on the compressor
without first having taken the plug out of the
plug socket.
• Do not aim water jets or jets of flammable
liquids at the compressor.
• Do not place flammable objects near the
compressor.
• Switch the pressure regulator to the “0”
position (OFF = uit) during dwell time.
• Never aim the air jet at persons or animals (fig.
20).
• Do not transport the compressor with the tank
pressurised.
• N.B.: some parts of the compressor such as
the head and the feed-through pipes may
5
EN