TD 309 - Thorens

Setup and Assembly
Place the glass platter onto the sub-platter (frosted side
down). ➔ Fig. 4
Then place the felt mat on the platter. The soft mat prevents
slippage during playback and minimises wear
and tear on your records.
Fig. 5
Place the balance weight on the base so that it sits
exactly above the front left sub-chassis foot (this is its
default position). Move the balance weight for fine adjustment,
determining the best position through listening
tests. ➔ Fig. 5
Fig. 4
This almost completes the assembly of the turntable.
The only part missing now is the tonearm counterweight.
➔ Page 30
26