termo 1250-1600.cdr - Soler & Palau

4-CHARACTERISTICS AND TECHNICAL INFORMATION
GENERAL DESCRIPTION.
The TERMOTECH model is a heating panel for both domestic use and industrial
use. It is essentially designed to heat areas in offices, businesses, laboratories
and other rooms. Thanks to its flat design, it blends in well with the decoration in
any of these settings.
TECHNICAL DATA
Classification against risk of electric shock: Class I
Degree of protection IP 40
Temperature Power Current Voltage: (V) Dimensions Colour
Surface areal * (W) (A) (+/-10) (mm) RAL
TERMOTECH-1250 100ºC 1250 5,4 230 600x18000x60 9010
TERMOTECH-1750 135ºC 1750 7,6 230 600x18000x60 9010
* Surface temperature refers to an ambient temperature of 20ºC
TECHNICAL STANDARDAPPLIED
* The radiant panel has been developed following the rules laid down by the Low
Voltage Directives
UNE-EN 60335-1:2002
UNE-EN 60335-2-30:2004
5-INSTALLATION INSTRUCTIONS
PRELIMINARY OPERATIONSAND WARNINGS
Consult this manual on use and maintenance carefully before using the
appliance.
Unpack the appliance carefully and ensure that the panel is in a perfect
state. Should it present any defect or damage do not install it or try to repair it.
Contact your usual supplier or S&P technical service immediately.
10